|
DFLS2100 Datasheet, PDF (1/3 Pages) Diodes Incorporated – 2.0A HIGH VOLTAGE SCHOTTKY BARRIER RECTIFIER | |||
|
Features
⢠Guard Ring Die Construction for Transient Protection
⢠Low Power Loss, High Efficiency
⢠Patented Interlocking Clip Design for High Surge Current
Capacity
⢠Lead Free Finish, RoHS Compliant (Note 4)
⢠"Green" Molding Compound (No Br, Sb)
⢠Qualified to AEC-Q101 Standards for High Reliability
DFLS2100
2.0A HIGH VOLTAGE SCHOTTKY BARRIER RECTIFIER
PowerDI®123
Please click here to visit our online spice models database.
Mechanical Data
⢠Case: PowerDI®123
⢠Case Material: Molded Plastic, âGreenâ Molding Compound.
UL Flammability Classification Rating 94V-0
⢠Moisture Sensitivity: Level 1 per J-STD-020D
⢠Terminal Connections: Cathode Band
⢠Terminals: Finish â Matte Tin annealed over Copper
leadframe. Solderable per MIL-STD-202, Method 208
⢠Marking Information: See Page 3
⢠Ordering Information: See Page 3
⢠Weight: 0.01 grams (approximate)
Top View
Maximum Ratings @TA = 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
Characteristic
Symbol
Value
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
100
V
VR
RMS Reverse Voltage
VR(RMS)
71
V
Average Forward Current
IF(AV)
2.0
A
Non-Repetitive Peak Forward Surge Current 8.3ms
Single Half Sine-Wave Superimposed on Rated Load
IFSM
40
A
Thermal Characteristics
Characteristic
Thermal Resistance Junction to Soldering (Note 2)
Thermal Resistance Junction to Ambient (Note 1)
Operating and Storage Temperature Range
Symbol
RθJS
RθJA
TJ, TSTG
Typ
Max
â
7
125
â
-55 to +175
Unit
°C/W
°C/W
°C
Electrical Characteristics @TA = 25°C unless otherwise specified
Characteristic
Reverse Breakdown Voltage (Note 3)
Forward Voltage
Leakage Current (Note 3)
Total Capacitance
Symbol
V(BR)R
VF
IR
CT
Min
Typ
Max
Unit
100
â¯
â¯
V
â¯
â¯
0.77
0.86
V
â¯
â¯
1
μA
â¯
36
â¯
pF
Notes:
1. Part mounted on FR-4 board with 2 oz., minimum recommended copper pad layout, which can be found on our website at
http://www.diodes.com/datasheets/ap02001.pdf. TA = 25°C
2. Theoretical RθJS calculated from the top center of the die straight down to the PCB/cathode tab solder junction.
3. Short duration pulse test used to minimize self-heating effect.
4. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied, see EU Directive 2002/95/EC Annex Notes.
Test Condition
IR = 1μA
IF = 1.0A
IF = 2.0A
VR = 100V, TA = 25°C
VR = 5VDC, f = 1MHz
PowerDI is a registered trademark of Diodes Incorporated.
DFLS2100
Document number: DS31475 Rev. 1 - 2
1 of 3
www.diodes.com
June 2008
© Diodes Incorporated
|
▷ |