DFLS130L_15 Datasheet, PDF (1/4 Pages) Diodes Incorporated – 1.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER PowerDI®123

Features
• Guard Ring Die Construction for Transient Protection
• Low Power Loss, High Efficiency
• Patented Interlocking Clip Design for High Surge Current
Capacity
• High Current Capability and Low Forward Voltage Drop
• Lead Free Finish, RoHS Compliant (Note 4)
• "Green" Molding Compound (No Br, Sb)
• Qualified to AEC-Q101 Standards for High Reliability
DFLS130L
1.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER
PowerDI^®123
Please click here to visit our online spice models database.
Mechanical Data
• Case: PowerDI^®123
• Case Material: Molded Plastic, “Green” Molding Compound.
UL Flammability Classification Rating 94V-0
• Moisture Sensitivity: Level 1 per J-STD-020D
• Terminal Connections: Cathode Band
• Terminals: Finish – Matte Tin annealed over Copper
leadframe. Solderable per MIL-STD-202, Method 208
• Marking Information: See Page 2
• Ordering Information: See Page 2
• Weight: 0.01 grams (approximate)
Top View
Maximum Ratings @T_A = 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
Characteristic
Symbol
Value
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
V_RRM
V_RWM
30
V
V_R
V_R(RMS)
21
V
Average Forward Current @ T_T = 121°C
I_F(AV)
1.0
A
Non-Repetitive Peak Forward Surge Current 8.3ms
Single Half Sine-Wave Superimposed on Rated Load
I_FSM
50
A
Thermal Characteristics
Characteristic
Power Dissipation (Note 1)
Power Dissipation (Note 2)
Thermal Resistance Junction to Ambient (Note 1)
Thermal Resistance Junction to Ambient (Note 2)
Thermal Resistance Junction to Soldering (Note 3)
Operating Temperature Range
Storage Temperature Range
Symbol
P_D
P_D
R_θJA
R_θJA
R_θJS
T_J
T_STG
Value
1.67
556
60
180
10
-40 to +125
-40 to +150
Unit
W
mW
°C/W
°C/W
°C/W
°C
°C
Electrical Characteristics @T_A = 25°C unless otherwise specified
Characteristic
Reverse Breakdown Voltage (Note 5)
Forward Voltage
Leakage Current (Note 5)
Total Capacitance
Symbol Min
V_(BR)R
30
⎯
V_F
⎯
⎯
I_R
⎯
⎯
C_T
⎯
Typ
Max
⎯
⎯
0.210
⎯
0.310
⎯
0.328 0.36
0.260
⎯
⎯
1.0
76
⎯
Unit
V
V
mA
pF
Test Condition
I_R = 1.0mA
I_F = 0.1A
I_F = 1.0A
I_F = 1.5A
V_R = 5V, T_A = 25°C
V_R = 30V, T_A = 25°C
V_R = 10V, f = 1.0MHz
Notes:
1. Part mounted on 2"x2" GETEK board with 1"x1" copper pad, 25% anode, 75% cathode. T_A = 25°C.
2. Part mounted on FR-4 board with recommended pad layout, which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf.
3. Theoretical R_θJS calculated from the top center of the die straight down to the PCB/cathode tab solder junction.
4. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at http://www.diodes.com/products/lead_free.html.
5. Short duration pulse test used to minimize self-heating effect.
PowerDI is a registered trademark of Diodes Incorporated.
DFLS130L
Document number: DS30492 Rev. 4 - 2
1 of 4
www.diodes.com
June 2009
© Diodes Incorporated