DCX4710H_15 Datasheet, PDF (1/7 Pages) Diodes Incorporated – 100mA DUAL COMPLEMENTARY PRE-BIASED TRANSISTORS

DCX4710H
100mA DUAL COMPLEMENTARY PRE-BIASED TRANSISTORS
General Description
• DCX4710H is best suited for applications where the load
needs to be turned on and off using micro-controllers,
comparators or other control circuits, particularly at a point of
load. It features a discrete pre-biased PNP transistor which
can support continuous maximum current of 100 mA. It also
contains a pre-biased NPN transistor which can be used as a
control and can be biased using a higher supply. The
component devices can be used as a part of circuit or as
stand alone discrete devices.
Features
• Built in Biasing Resistors
• Epitaxial Planar Die Construction
• Ideally Suited for Automated Assembly Processes
• Lead Free By Design/RoHS Compliant (Note 1)
• "Green" Device (Note 2)
4
5
6
3
2
1
SOT-563
Mechanical Data
• Case: SOT-563
• Case Material: Molded Plastic. "Green Molding" Compound.
UL Flammability Classification Rating 94V-0
• Moisture Sensitivity: Level 1 per J-STD-020C
• Terminal Connections: See Fig. 2
• Terminals: Finish - Matte Tin annealed over Copper
leadframe. Solderable per MIL-STD-202, Method 208
• Marking & Type Code Information: See Page 7
• Ordering Information: See Page 7
• Weight: 0.005 grams (approximate)
Schematic and Pin Configuration
Reference
Q1
Q2
Device Type
PNP
NPN
R1 (NOM)
10KΩ
⎯
R2 (NOM)
47KΩ
⎯
R3 (NOM)
⎯
10KΩ
R4 (NOM)
⎯
10KΩ
Maximum Ratings: Total Device @T_A = 25°C unless otherwise specified
Characteristic
Output Current
Power Dissipation (Note 3)
Power Derating Factor above 45°C
Junction Operation and Storage Temperature Range
Thermal Resistance, Junction to Ambient Air (Note 3)
(Equivalent to one heated junction of PNP transistor) @ T_A = 25°C
Symbol
I_out
P_d
P_der
P_d
R_θJA
Value
100
150
1.43
-55 to +150
833
Unit
mA
mW
mW/°C
°C
°C/W
Notes:
1. No purposefully added lead.
2 . Diodes Inc.'s "Green" policy can be found on our website at http:/www.diodes.com/products/lead_free/index.php.
3. Device mounted on FR-4 PCB, 1 inch x 0.85 inch x 0.062 inch; as per Diodes Inc. suggested pad layout document AP02001 on our website
at http://www.diodes.com/datasheets/ap02001.pdf.
DS30871 Rev. 6 - 2
1 of 7
www.diodes.com
DCX4710H
© Diodes Incorporated