English
Language : 

DCX100NS_1 Datasheet, PDF (1/7 Pages) Diodes Incorporated – 100mA DUAL PRE-BIASED TRANSISTORS
General Descriptions
• DCX100NS is best suited for applications where the load
needs to be turned on and off using control circuits like
micro-controllers, comparators etc. particularly at a point
of load. It features a discrete PNP pass transistor which
can support continuous maximum current up to 100 mA. It
also contains an NPN transistor which can be used as a
control switch and can also be biased using higher
supply. The component devices can be used as part of a
circuit or as stand alone discrete devices.
Features
• Built in Biasing Resistors
• Epitaxial Planar Die Construction
• Lead Free By Design/ROHS Compliant (Note 1)
• "Green" Device (Note 2)
• Ideally Suited for Automated Assembly Processes
Mechanical Data
• Case: SOT-563
• Case Material: Molded Plastic. "Green” Molding
Compound. UL Flammability Classification Rating 94V-0
• Moisture Sensitivity: Level 1 per J-STD-020
• Terminal Connections: See Diagram
• Terminals: Finish - Matte Tin annealed over Copper
leadframe. Solderable per MIL-STD-202, Method 208
• Marking Information: See Page 5
• Ordering Information: See Page 5
• Weight: 0.0035 grams (approximate)
DCX100NS
100mA DUAL PRE-BIASED TRANSISTORS
Please click here to visit our online spice models database.
SOT-563
Schematic and Pin Configuration
Reference
Q1
Q2
Device Type
PNP
NPN
R1 (NOM)
1KΩ
⎯
R2 (NOM)
10KΩ
⎯
R3, R4 (NOM)
⎯
10KΩ
Maximum Ratings: Total Device
Characteristic
Power Dissipation
Collector Current (using PNP as Pass Transistor)
Thermal Resistance, Junction to Ambient Air
Operating and Storage Junction Temperature Range
@TA = 25°C unless otherwise specified
(Note 3)
(Note 3)
Symbol
PD
IC(max)
RθJA
TJ, TSTG
Value
150
100
833
-55 to +150
Unit
mW
mA
°C/W
°C
Sub-Component Device - Pre-Biased PNP Transistor @TA = 25°C unless otherwise specified
Supply Voltage
Input Voltage
Output Current
Characteristic
Symbol
Vcc
Vin
Ic
Value
-50
+5 to -10
-100
Unit
V
V
mA
Notes:
1. No purposefully added lead.
2. Diodes Inc.'s "Green" policy can be found on our website at http:/www.diodes.com/products/lead_free/index.php.
3. Device mounted on FR-4 PCB, 1 inch x 0.85 inch x 0.062 inch; please see page 6 or as per Diodes Inc. suggested pad layout document AP02001 on
our website at http://www.diodes.com/datasheets/ap02001.pdf.
DS30761 Rev. 6 - 2
1 of 6
www.diodes.com
DCX100NS
© Diodes Incorporated