B140HB_1 Datasheet, PDF (1/3 Pages) Diodes Incorporated – 1.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER

SPICE MODEL: B140HB
B140HB
1.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER
Features
· Low Leakage Current
· Guard Ring Die Construction for
Transient Protection
· Ideally Suited for Automatic Assembly
· Low Power Loss, High Efficiency
· Surge Overload Rating to 45A Peak
· Lead Free/RoHS Compliant (Note 3)
Mechanical Data
· Case: SMB
· Case Material: Molded Plastic. UL Flammability
Classification Rating 94V-0
· Moisture Sensitivity: Level 1 per J-STD-020C
· Terminals: Lead Free Plating (Matte Tin Finish).
Solderable per MIL-STD-202, Method 208 _e3
· Marking Informaton: See page 3
· Ordering Information: See page 3
· Polarity: Cathode Band or Cathode Notch
· Weight: 0.093 grams (approximate)
B
A
C
D
J
H
G
E
SMB
Dim Min Max
A
3.30 3.94
B
4.06 4.57
C
1.96 2.21
D
0.15 0.31
E
5.00 5.59
G
0.10 0.20
H
0.76 1.52
J
2.00 2.62
All Dimensions in mm
Maximum Ratings and Electrical Characteristics ^{@ TA = 25°C unless otherwise specified}
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Characteristic
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
@ I_R = 0.1mA
Average Rectified Output Current
@ T_T = 115°C
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave superimposed on rated load
Non-Repetitive Peak Forward Surge Current
5ms Single half sine-wave
Forward Voltage
@ I_F = 1.0A, @ T_j = 25°C
@ I_F = 2.0A, @ T_j = 25°C
@ I_F = 1.0A, @ T_j = 125°C
@ I_F = 2.0A, @ T_j = 125°C
Peak Reverse Current
at Rated DC Blocking Voltage
@ T_A = 25°C
@ TA = 125°C
Typical Total Capacitance (Note 2)
Typical Thermal Resistance Junction to Terminal (Note 1)
Operating and Storage Temperature Range
Symbol
V_RRM
VRWM
VR
V_R(RMS)
IO
IFSM
I_FSM
V_FM
I_RM
C_T
RqJT
T_j, T_STG
Value
40
28
1.0
45
430
0.53
0.70
0.49
0.64
0.1
4.0
80
36
-55 to +150
Unit
V
V
A
A
A
V
mA
pF
°C/W
°C
Notes:
1. Thermal Resistance: Junction to terminal, unit mounted on PC board with 5.0 mm² (0.013 mm thick) copper pads as heat sink.
2. Measured at 1.0MHz and applied reverse voltage of 5.0V DC.
3. RoHS revision 13.2.2003. High Temperature Solder Exemption Applied, see EU Directive Annex Note 7.
DS30128 Rev. 8 - 2
1 of 3
www.diodes.com
B140HB
ã Diodes Incorporated