B0520WS_1 Datasheet, PDF (1/3 Pages) Diodes Incorporated – SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER

SPICE MODEL: B0520WS
B0520WS
Lead-free
SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER
Features
· Very Low Forward Voltage Drop
· Guard Ring Construction for Transient Protection
· High Conductance
· Lead Free/RoHS Compliant (Note 4)
Mechanical Data
H
· Case: SOD-323
· Case Material: Molded Plastic. UL Flammability
Classification Rating 94V-0
· Moisture sensitivity: Level 1 per J-STD-020C
· Leads: Solderable per MIL-STD-202, Method 208
· Lead Free Plating (Matte Tin Finish annealed over Alloy 42
leadframe). Please see Ordering Information, Note 4, on
C
Page 1
· Polarity: Cathode Band
· Marking: SD, See Page 2
· Weight: 0.004 grams (approx.)
D
G
A
B
E
SOD-323
Dim Min Max
A
2.30 2.70
J
B
1.60 1.80
C
1.20 1.40
D
1.05 Typical
E
0.25 0.35
G
0.20 0.40
H
0.10 0.15
J
0.05 Typical
a
0°
8°
All Dimensions in mm
Maximum Ratings ^{@ T}A ^{= 25°C unless otherwise specified}
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Characteristic
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
Average Rectified Output Current
Non-Repetitive Peak Forward Surge Current
8.3ms single half sine-wave superimposed on rated load
(JEDEC Method)
Power Dissipation (Note 1)
Typical Thermal Resistance Junction to Ambient (Note 1)
Operating and Storage Temperature Range
Symbol
V_RRM
VRWM
V_R
V_R(RMS)
I_O
I_FSM
P_D
R_qJA
T_j, T_STG
Electrical Characteristics ^{@ TA = 25°C unless otherwise specified}
Characteristic
Minimum Reverse Breakdown Voltage (Note 2)
Maximum Forward Voltage Drop
Maximum Leakage Current (Note 2)
Typical Total Capacitance
Symbol
V_(BR)R
VF
I_R
C_T
Value
20
0.310
0.430
100
250
58
Value
20
14
0.5
2
235
426
-55 to +125
Unit
V
V
A
A
mW
°C/W
°C
Unit
V
V
mA
pF
Test Conditions
IR = 0.5mA
I_F = 0.1A
IF = 0.5A
VR = 10V
VR = 20V
f = 1MHz, VR = 0VDC
Ordering Information ^{(Note 3)}
Device
B0520WS-7-F
Packaging
SOD-323
Shipping
3000/Tape and Reel
Note:
1. Part mounted on FR-4 PC board with recommended pad layout, which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf.
2. Short duration test pulse used to minimize self-heating effect.
3. For Packaging Details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf.
4. No purposefully added lead.
DS30235 Rev. 10 - 2
1 of 3
www.diodes.com
B0520WS
ã Diodes Incorporated