AP432 Datasheet, PDF (1/12 Pages) Anachip Corp – Adjustable Precision Shunt Regulator

AP432/AP432A
ADJUSTABLE PRECISION SHUNT REGULATOR
Features
General Description
• Precision reference voltage
The AP432/432A are 3-terminal adjustable precision shunt
AP432 : 1.24V ± 1%
regulators with guaranteed stable temperature over the
AP432A : 1.24V ± 0.5%
• Sink current capability: 200mA
• Minimum cathode current for regulation: 150µA
• Equivalent full-range temp coefficient: 30 ppm/^oC
• Fast turn-on response
• Low dynamic output impedance: 0.2Ω
• Programmable output voltage to 20V
applicable extended commercial temperature range. The output
voltage may be set at any level greater than 1.24\/ (V_REF) up to
20V merely by selecting two external resistors that act as a
voltage divider network. These devices have a typical output
impedance of 0.2Ω. Active output circuitry provides very sharp
turn-on characteristics, making these devices excellent improved
replacements for Zener diodes in many applications.
• Low output noise
The precise +/- 1% reference voltage tolerance of the
• Packages: SOT23, SOT23R, SOT25, SC59 (W package _{AP432/432A make it possible in many applications to avoid the}
code), SC59 (R package code), SOP-8L and TO92-3L _{use of a variable resistor, consequently saving cost and}
• SOT23, SOT23R, SOP-8L and SC59: Available in
eliminating drift and reliability problems associated with it.
“Green” Molding Compound (No Br, Sb) (Note 1)
• Lead Free Finish/ RoHS Compliant for Lead Free and
“Green” Products (Note 2)
Ordering Information
A P 4 3 2X X X X
Reference Voltage
Tolerance:
Blank : +/- 1%
A : +/- 0.5%
Package
Blank : SOP-8L
V : TO92-3L
SA : SOT23
W : SC59
R : SC59
Q : SOT25
SR : SOT23R
Lead-Free
L : Lead Free
G : Green (Note 1)
Packing
-B : Bulk
-7/-13 : Taping
-A : Ammo Box (Note 3)
Note: 1. SOT23, SOT23R are “Green” products only.
2. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7.
Device
(Note 4)
Package
Code
Packaging
(Note 5)
7” Tape and Reel
Quantity
Part Number
Suffix
13” Tape and Reel
Ammo Box
Quantity
Part Number
Suffix
Quantity
Part Number
Suffix
AP432(A)SA
SA
SOT23
3000/Tape
& Reel
-7
NA
NA
NA
NA
AP432(A)SR
SR
SOT23R
3000/Tape
& Reel
-7
NA
NA
NA
NA
AP432(A)Q
Lead-free
Q
SOT25
3000/Tape
& Reel
-7
NA
NA
NA
NA
AP432(A)W
W
SC59
3000/Tape
& Reel
-7
NA
NA
NA
NA
AP432(A)R
R
SC59
3000/Tape
& Reel
-7
NA
NA
NA
NA
AP432(A)
SOP-8L
NA
NA
2500/Tape &
Reel
-13
NA
NA
AP432(A)V
V
TO92-3L
NA
NA
NA
NA
2000/Box
-A
Lead-free
Notes: 3. Ammo Box is for TO92-3 Spread Lead.
4. Suffix “A” denotes AP432A device.
5. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at
http://www.diodes.com/datasheets/ap02001.pdf.
AP432/AP432A Rev. 6
1 of 12
www.diodes.com
MARCH 2007
© Diodes Incorporated