|
AP3783 Datasheet, PDF (1/17 Pages) Diodes Incorporated – PRIMARY SIDE REGULATED SWITCHING MODE POWER SUPPLY CONTROLLER | |||
|
AP3783
PRIMARY SIDE REGULATED SWITCHING MODE POWER SUPPLY CONTROLLER
Description
Pin Assignments
The AP3783 is a high performance AC/DC power supply controller for
battery charger and adapter applications. The controller regulates the
output voltage and current in the primary side by piece-wise Pulse
Frequency Modulation (p-PFM) in discontinuous conduction mode
(DCM).
(Top View)
Pin 1 Mark
The AP3783 provides accurate constant voltage (CV), constant
current (CC) and outstanding dynamic performance without requiring
an opto-coupler. It also eliminates the need of loop compensation
circuitry while maintaining stability.
The AP3783 provides valley turn-on function, operating frequency
Jitter function (about 5.5% frequency change every 256μs) from light
to full load range and 3-segment drive current to improve the power
supply EMI performance. The AP3783 also has built-in fixed cable
voltage drop compensation (10%, 7% and 4% of nominal system
output voltage to meet various cables with different length and gauge)
and adjustable line voltage compensation.
The AP3783 is packaged in SOT26.
Applications
ï· Adapters/Chargers
ï· LED Lighting
ï· Standby and Auxiliary Power Supplies
CS 1
GND 2
VCC 3
6 CPC
5 DRI
4 FB
SOT26
Features
ï· Less than 75mW Standby Power Consumption
ï· Meet Efficiency Requirement of COC Trier2
ï· Valley Turn-on to Reduce Switching Loss and Improve EMI
ï· Piece-wise Frequency Reduction to Enhance Conversion
Efficiency and Suppress Audio Noise
ï· Over Voltage Protection (OVP)
ï· Over Temperature Protection (OTP)
ï· Short Circuit Protection (SCP) with Hiccup
ï· 3-Segment Drive Current for Radiative EMI Suppression
ï· Operating Frequency Jitter Function for Conductive EMI
Suppression
ï· Drive MOSFET for 5W to 30W Battery Charger/Adapter
Applications
ï· SOT26 SMD Package Comply with Level 3 of IPC/JEDEC J-STD-
033A
ï· Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
ï· Halogen and Antimony Free. âGreenâ Device (Note 3)
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporatedâs definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Greenâ products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
AP3783
Document number: DS37429 Rev. 6 - 2
1 of 17
www.diodes.com
December 2015
© Diodes Incorporated
|
▷ |