|
AP22802 Datasheet, PDF (1/14 Pages) Diodes Incorporated – SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH | |||
|
AP22802
SINGLE CHANNEL POWER DISTRIBUTION LOA9D65S0W1I0TCH
Description
The AP22802 is a single channel current-limited integrated high-side
power switch optimized for Universal Serial Bus (USB) and other
hot-swap applications. The family of devices complies with
USB standards and is available with both polarities of Enable input.
The device has fast short-circuit response time for improved overall
system robustness, and has an integrated output discharge function
to ensure completely controlled discharging of the output voltage
capacitor. They provide a complete protection solution for applications
subject to heavy capacitive loads and the prospect of short circuit,
and offer reverse current blocking, over-current, over-temperature
and short-circuit protection, as well as controlled rise time and
under-voltage lockout functionality. A 6ms deglitch capability on the
open-drain Flag output prevents false over-current reporting and does
not require any external components.
The AP22802 is available in a standard Green SOT25 and RoHS
compliant.
Features
ï· Integrated Single Channel Load Switch
ï· Protection
ï§ Over Current with Auto Recovery
ï§ Short Circuit with Auto Recovery
ï§ Over Temperature with Auto Recovery
ï· Small Form Factor Packages
SOT25 â Footprint of just 9mm2
ï· Thermally Efficient Low Profile Package
ï· Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
ï· Halogen and Antimony Free. âGreenâ Device (Note 3)
ï· UL Recognized, File Number E322375
ï· IEC60950-1 CB Scheme Certified
Pin Assignments
Top View
OUT 1
GND 2
FLG 3
5 IN
4 EN
SOT25
Applications
ï· Integrated Load Switches in Ultrabook PCâs
ï· Power Up/Down Sequencing in Ultrabook PCâs
ï· Notebook
ï· Netbook
ï· Set-Top Boxes
ï· SSD (Solid State Drives)
ï· Consumer Electronics
ï· Tablet PC
ï· Telecom Systems
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporatedâs definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Greenâ products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
Typical Applications Circuit
Enable Active High
Power Supply
2.7V to 5.5V
10k
IN
1μF
OUT
Load
0.1μF
120μF
FLG
ON
OFF
EN GND
AP22802
Document number: DS36218 Rev. 3 - 2
1 of 14
www.diodes.com
August 2015
© Diodes Incorporated
|
▷ |