AP1694AS Datasheet, PDF (1/14 Pages) Diodes Incorporated – OFFLINE, HIGH PF, HIGH EFFICIENCY DIMMABLE LED DRIVER CONTROLLER

AP1694AS-13
OFFLINE, HIGH PF, HIGH EFFICIENCY DIMMABLE LED DRIVER CONTROLLER
Description
The AP1694AS-13 is a high performance AC-DC power factor
corrector for mains dimmable LED driver applications. The device
uses Pulse Frequency Modulation (PFM) technology to regulate
output current while achieving high power factor and low THD. It
operates as a BCM (Boundary Conduction Mode) controller which is
good for EMI.
The AP1694AS-13 provides accurate constant current (CC) regulation
while removing the opto-coupler and secondary control circuitry. It
also eliminates the need for loop compensation circuitry while
maintaining stability. It can meet the requirement of IEC6100-3-2
harmonic standard.
The AP1694AS-13 features low start-up current and low operation
current. It adopts valley on switching mode to achieve high efficiency.
It also has rich protection features including overvoltage, short circuit,
and over-temperature protection.
The AP1694AS-13 provides the dimmable LED driver with a wide
dimmer compatibility including leading edge and trailing edge dimmer.
The AP1694AS-13 can achieve deep dimming down to 1%, while the
dimming curve is compliant with the standard of NEMA SSL6.
The AP1694AS-13 is available in SO-8 package.
Applications
 Mains Dimmable LED Lighting
Pin Assignments
(Top View)
NC 1
RI 2
SGND 3
CS 4
SO-8
8 VCC
7 OUT
6 GND
5 FB
Features
 Primary Side Control for Output Current Regulation without Opto-
coupler
 Boundary Conduction Mode (BCM) Operation to Achieve High-
efficiency
 High PF and Low THD (PF > 0.9, THD < 30%)
 High Efficiency without Dimmer
 Wide Range of Dimmer Compatibility
 Dimming Curve Compliant with NEMA SSL6
 Low Start-Up Current
 Tight LED Current
 Tight LED Open Voltage
 Valley-Mode Switching to Minimize the Transition Loss
 Mosfet Driver up to 25W
 Easy EMI
 Internal Protections:
 Under Voltage Lock Out(UVLO)
 Leading-Edge Blanking (LEB)
 Output Short Protection
 Output Open Protection
 Over Temperature Protection
 Flexible for Design with Small Form Factor and Very Low BOM
Cost
 Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
 Halogen and Antimony Free. “Green” Device (Note 3)
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
AP1694AS-13
Document number: DS37789 Rev. 1 - 2
1 of 14
www.diodes.com
July 2015
© Diodes Incorporated