AP1684 Datasheet, PDF (1/13 Pages) Diodes Incorporated – AC/DC, HIGH PF, HIGH EFFICIENCY LED DRIVER CONTROLLER

A Product Line of
Diodes Incorporated
AP1684
AC/DC, HIGH PF, HIGH EFFICIENCY LED DRIVER CONTROLLER
Description
Pin Assignments
The AP1684 is a high performance AC/DC power factor corrected
LED driver controller which is driving high voltage bipolar transistor.
The device uses Pulse Frequency Modulation (PFM) technology to
regulate output current while achieving high power factor and low
THD. It operates as a boundary condition mode (BCM) buck controller
which is good for EMI.
The AP1684 provides accurate constant current (CC) regulation while
removing the opto-coupler and secondary control circuitry. It also
eliminates the need of loop compensation circuitry while maintaining
stability. It can meet the requirement of IEC6100-3-2 harmonic
standard.
The AP1684 features low start-up current, low operation current and
high voltage driving bipolar transistor. It adopts dynamic base driver
control technology and valley on switching mode to achieve high
efficiency. It also has rich protection features including over voltage,
short circuit, over temperature protection.
The AP1684 is available in SO-8 package.
Applications
 LED Bulb Lamp
 LED Down Light
 GU10/E27
 Other Non-dimmable LED Lighting
(Top View)
NC 1
RI 2
RM 3
CS 4
8 VCC
7 OUT
6 GND
5 FB
(SO-8/ M Package)
Features
 Low Start-up Current
 High PF and Low THD (PF > 0.9, THD < 30%)
 High Efficiency up to 92%
 BCM Mode
 Output Current Accuracy on IC Level: ±2%
 Tight LED Open Voltage
 Valley-mode Switching to Minimize the Transition Loss
 BJT Transistor Driver
 Dynamic Base Driver Control
 Open-load and Reload Detection
 Internal Protections:
 Under Voltage Lock Out (UVLO)
 Leading-edge Blanking (LEB)
 Output Short Protection
 Output Open Protection
 Over Temperature Protection
 Low System Cost
 SO-8 Package
 Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
 Halogen and Antimony Free. “Green” Device (Note 3)
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
Typical Applications Circuit
L1
F1
AC
VR1
Input
C1
DB1
C2
R9
R3
D1
C3
8
VCC FB ⁵
2 _RI
R1
OUT ⁷
R2
3 _RM
GND
CS
4
6
D2
R4
R5
Q1
R6
R7 _R8
+ _C4
OUT
T1
AP1684
Document number: DS36547 Rev. 3 - 2
1 of 13
www.diodes.com
February 2014
© Diodes Incorporated