AP1533 Datasheet, PDF (1/8 Pages) Diodes Incorporated – PWM CONTROL 1.8A STEP-DOWN CONVERTER

AP1533
PWM CONTROL 1.8A STEP-DOWN CONVERTER
Features
• Input voltage: 4V to 23V
• Output voltage: 0.8V to VCC
• Output current: 1.8A up to peak 2A
• Duty ratio: 0% to 99% PWM control
• Oscillation frequency: 300KHz typ.
• Soft-start like, Current limit and Enable function
• Thermal Shutdown function
• Built-in internal SW P-channel MOS
• SOP-8L: Available in “Green” Molding Compound
(No Br, Sb)
• Lead Free Finish / RoHS Compliant (Note 1)
General Description
AP1533 consists of step-down switching regulator with PWM
control. These devices include a reference voltage source,
oscillation circuit, error amplifier, internal PMOS.
AP1533 provides low-ripple power, high efficiency, and excellent
transient characteristics. The PWM control circuit is able to vary
the duty ratio linearly from 0 up to 99%. This converter also
contains an error amplifier circuit as well as a soft-start circuit that
prevents overshoot at startup. An enable function, an over current
protect function and a short circuit protect function are built inside,
and when OCP or SCP happens, the operation frequency will be
reduced from 300KHz to 50KHz. Also, an internal compensation
block is built in to minimum external component count.
With the addition of an internal P-channel Power MOS, a coil,
capacitors, and a diode connected externally, these ICs can
function as step-down switching regulators. They serve as ideal
power supply units for portable devices when coupled with the
SOP-8L mini-package, providing such outstanding features as low
current consumption. Since this converter can accommodate an
input voltage up to 23V, it is also suitable for the operation via an
AC adapter.
Applications
• PC Motherboard
• LCD Monitor
• Graphic Card
• DVD-Video Player
• Telecom Equipment
• ADSL Modem
• Printer and other Peripheral Equipment
• Microprocessor core supply
Ordering Information
AP1533 X X X
Package
S : SOP-8L
Lead Free
G : Green
Packing
-U : Tube
-13 : Taping
Note: 1. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7.
Device
AP1533S
Package Packaging
Code (Note 2)
S
SOP-8L
Tube/Bulk
Quantity Part Number
Suffix
100
-U
13” Tape and Reel
Quantity
Part Number
Suffix
2500/Tape & Reel
-13
Note: 2. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at
http://www.diodes.com/datasheets/ap02001.pdf.
AP1533 Rev. 1
1 of 8
www.diodes.com
JULY 2007
© Diodes Incorporated