74LVC573A Datasheet, PDF (1/11 Pages) NXP Semiconductors – Octal D-type transparent latch with 5-volt tolerant inputs/outputs 3-State

74LVC573A
Description
OCTAL TRANSPARENT D-TYPE LATCH WITH 3 STATE OUTPUTS
A
Pin Assignments
The 74LVC573A provides eight transparent D-type latches. While
the latch-enable (LE) input is high, the Q outputs follow the data (D)
inputs. When LE is taken low, the Q outputs are latched at the logic
levels set up at the D inputs. A buffered output-enable (OE) input
can be used to place the eight outputs in either a normal logic state
(high or low logic levels) or the high-impedance state. In the high-
impedance state, the outputs neither load nor drive the bus lines
significantly. The high-impedance state and increased drive provide
the capability to drive bus lines without interface or pullup
components. OE does not affect the internal operations of the
latches. Old data can be retained or new data can be entered while
the outputs are in the high-impedance state.
These devices feature inputs and outputs on opposite sides of the
package that facilitate printed circuit board layout. The device is
designed for operation with a power supply range of 1.65V to 3.6V.
OE
D1
D2
D3
D4
D5
D6
D7
D8
GND
(Top View )
1
20
2
19
3
18
4
17
5
16
6
15
7
14
8
13
9
12
10
11
Vcc
Q1
Q2
Q3
Q4
Q5
Q6
Q7
Q8
LE
(Top Transparent View)
terminal
ind1ex
area
D1 2
D2 3
D3 4
D4 5
D5 6
D6 7
D7 8
D8 9
19 Q1
18 Q2
17 Q3
16 Q4
15 Q5
14 Q6
13 Q7
12 Q8
The inputs are tolerant to 5.5V allowing this device to be used in a
mixed voltage environment. The device is fully specified for partial
power down applications using IOFF. The IOFF circuitry disables the
output preventing damaging current backflow when the device is
powered down.
Features
 Supply Voltage Range from 1.65V to 3.6V
 Sinks or Sources 24mA at VCC = 3V
 CMOS Low Power Consumption
 IOFF Supports Partial-Power Down Operation
 Inputs or Outputs Accept Up to 5.5V
 Inputs Can Be Driven by 3.3V or 5V Allowing for Mixed Voltage
Applications
 Schmitt Trigger Action at All Inputs
 Typical VOLP (Quiet Output Ground Bounce) Less than 0.8V
with VCC = 3.3V and TA = +25°C
 Typical VOHV (Quiet Output Dynamic VOH) Greater than 2.0V
with VCC = 3.3V and TA = +25°C
 ESD Protection Tested per JESD 22
 Exceeds 200-V Machine Model (A115)
 Exceeds 2000-V Human Body Model (A114)
 Exceeds 1000-V Charged Device Model (C101)
 Latch-Up Exceeds 250mA per JESD 78, Class I
 All devices are:
 Totally Lead-Free & Fully RoHS compliant (Notes 1 & 2)
 Halogen and Antimony Free. “Green” Device (Note 3)
TSSOP-20
V-QFN4525-20
Applications
 General Purpose Logic
 Bus Driving
 Power Down Signal Isolation
 Wide Array of Products such as:
 PCs, Notebooks, Netbooks, Ultrabooks
 Networking Computer Peripherals, Hard Drives, CD/DVD
ROM
 TV, DVD, DVR, Set Top Box
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen and Antimony free,
"Green" and Lead-Free.
3. Halogen and Antimony free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
74LVC573A
Document number: DS35897 Rev. 2 - 2
1 of 11
www.diodes.com
May 2015
© Diodes Incorporated