74AUP1G126 Datasheet, PDF (1/13 Pages) NXP Semiconductors – Low-Power buffer/line driver; 3-state

74AUP1G126
SINGLE BUFFER GATE WITH 3-STATE OUTPUT
Description
The Advanced Ultra Low Power (AUP) CMOS logic family is designed
for low power and extended battery life in portable applications.
The 74AUP1G126 is a single non-inverting buffer/bus driver designed
for operation over a power supply range of 0.8V to 3.6V. The device
has a 3-state output that enters a high impedance state when a
LOW-level is applied to the output enable (OE) pin. The device is fully
specified for partial power down applications using I_OFF. The I_OFF
circuitry disables the output preventing damaging current backflow
when the device is powered down
Features
• Advanced Ultra Low Power (AUP) CMOS
• Supply Voltage Range from 0.8V to 3.6V
• ±4mA Output Drive at 3.0V
• Low Static power consumption
ƒ I_CC < 0.9µA
• Low Dynamic Power Consumption
ƒ C_PD = 6.3pF (Typical at 3.6V)
• Schmitt Trigger Action at All Inputs Make the Circuit Tolerant for
Slower Input Rise and Fall Time. The hysteresis is typically
250mV at V_CC = 3.0V
• I_OFF Supports Partial-Power-Down Mode Operation
• ESD Protection Exceeds JESD 22
ƒ 2000-V Human Body Model (A114-A)
ƒ Exceeds 1000-V Charged Device Model (C101C)
• Latch-Up Exceeds 100mA per JESD 78, Class II
• Range of Package Options SOT353, DFN1410, and DFN1010
• Leadless packages per JESD30E
ƒ DFN1010 denoted as X2-DFN1010-6
ƒ DFN1014 denoted as X2-DFN1014-6
• Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
• Halogen and Antimony Free. “Green” Device (Note 3)
Pin Assignments
(Top View)
OE 1
5 Vcc
A2
GND 3
4Y
SOT353
(Top View)
OE 1 6 Vcc
A 2 5 NC
GND 3 4 Y
DFN1410
(Top View)
OE 1
A2
GND 3
6 Vcc
5 NC
4_Y
DFN1010
Applications
• Suited for battery and low power needs
• Wide array of products such as:
ƒ Tablets, E-readers
ƒ Cell Phones, Personal Navigation / GPS
ƒ MP3 players ,Cameras, Video Recorders
ƒ PCs ultrabooks, notebooks, netbooks,
ƒ Computer peripherals, hard drives, CD/DVD ROM
ƒ TV, DVD, DVR, set top box
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
Click here for ordering information, located at the end of datasheet
74AUP1G126
Document number: DS35158 Rev. 1 - 2
1 of 13
www.diodes.com
August 2012
© Diodes Incorporated