|
74AUP1G125 Datasheet, PDF (1/13 Pages) NXP Semiconductors – Low-power buffer/line driver; 3-state | |||
|
74AUP1G125
SINGLE BUFFER GATE WITH 3-STATE OUTPUT
Description
The Advanced Ultra Low Power (AUP) CMOS logic family is designed
for low power and extended battery life in portable applications.
The 74AUP1G125 is a single non-inverting buffer/bus driver designed
for operation over a power supply range of 0.8V to 3.6V. The device
has a 3-state output that enters a high impedance state when a
HIGH-level is applied to the output enable (OE) pin. The device is
fully specified for partial power down applications using IOFF. The IOFF
circuitry disables the output preventing damaging current backflow
when the device is powered down.
Pin Assignments
(Top View)
OE 1
5 Vcc
A2
GND 3
4Y
SOT353
Features
⢠Advanced Ultra Low Power (AUP) CMOS
⢠Supply Voltage Range from 0.8V to 3.6V
⢠± 4mA Output Drive at 3.0V
⢠Low Static power consumption
 Icc < 0.9µA
⢠Low Dynamic Power Consumption
 CPD = 6.3pF (Typical at 3.6V)
⢠Schmitt Trigger Action at All Inputs Make the Circuit Tolerant for
Slower Input Rise and Fall Time. The hysteresis is typically
250mV at VCC = 3.0V
⢠IOFF Supports Partial-Power-Down Mode Operation
⢠ESD Protection Exceeds JESD 22
 2000-V Human Body Model (A114-A)
 Exceeds 1000-V Charged Device Model (C101C)
⢠Latch-Up Exceeds 100mA per JESD 78, Class II
⢠Range of Package Options SOT353, DFN1410, and DFN1010
⢠Leadless packages per JESD30E
 DFN1010 denoted as X2-DFN1010-6
 DFN1014 denoted as X2-DFN1014-6
⢠Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
⢠Halogen and Antimony Free. âGreenâ Device (Note 3)
(Top View)
OE 1 6 Vcc
A 2 5 NC
GND 3 4 Y
DFN1410
(Top View)
OE 1
A2
GND 3
6 Vcc
5 NC
4Y
DFN1010
Applications
⢠Suited for battery and low power needs
⢠Wide array of products such as:
 Tablets, E-readers
 Cell Phones, Personal Navigation / GPS
 MP3 players ,Cameras, Video Recorders
 PCs ultrabooks, notebooks, netbooks,
 Computer peripherals, hard drives, CD/DVD ROM
 TV, DVD, DVR, set top box
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com for more information about Diodes Incorporatedâs definitions of Halogen- and Antimony-free, "Green" and Lead-free.
3. Halogen- and Antimony-free "Greenâ products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
Click here for ordering information, located at the end of datasheet
74AUP1G125
Document number: DS35157 Rev. 1 - 2
1 of 13
www.diodes.com
August 2012
© Diodes Incorporated
|
▷ |