1N5817_1 Datasheet, PDF (1/3 Pages) Diodes Incorporated – 1.0A SCHOTTKY BARRIER RECTIFIER

SPICE MODELS: 1N5817 1N5818 1N5819
1N5817 - 1N5819
1.0A SCHOTTKY BARRIER RECTIFIER
Features
· Guard Ring Die Construction for Transient Protection
· Low Power Loss, High Efficiency
· High Surge Capability
· High Current Capability and Low Forward Voltage Drop
· For Use in Low Voltage, High Frequency Inverters, Free
Wheeling, and Polarity Protection Application
· Lead Free Finish, RoHS Compliant (Note 5)
Mechanical Data
· Case: DO-41
· Case Material: Molded Plastic. UL Flammability
Classification Rating 94V-0
· Moisture Sensitivity: Level 1 per J-STD-020C
· Terminals: Finish ¾ Tin. Plated Leads Solderable per
MIL-STD-202, Method 208
· Polarity: Cathode Band
· Ordering Information: See Page 2
· Marking: Type Number and Date Code
· Weight: 0.3 grams (approximate)
A
B
A
C
D
DO-41 Plastic
Dim
Min
Max
A
25.40
¾
B
4.06
5.21
C
0.71
0.864
D
2.00
2.72
All Dimensions in mm
Maximum Ratings and Electrical Characteristics ^{@ TA = 25°C unless otherwise specified}
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Characteristic
Symbol
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
V_RRM
V_RWM
VR
RMS Reverse Voltage
V_R(RMS)
Average Rectified Output Current
(Note 1)
@ T_L = 90°C
IO
Non-Repetitive Peak Forward Surge Current 8.3ms
single half sine-wave superimposed on rated load
I_FSM
Forward Voltage (Note 2)
@ I_F = 1.0A
@ I_F = 3.0A
V_FM
Peak Reverse Leakage Current
at Rated DC Blocking Voltage (Note 2)
@ T_A = 25°C
@ T_A = 100°C
IRM
Typical Total Capacitance (Note 3)
C_T
Typical Thermal Resistance Junction to Lead (Note 4)
R_qJL
Typical Thermal Resistance Junction to Ambient
RqJA
Operating and Storage Temperature Range
T_j, T_STG
1N5817
20
14
0.450
0.750
1N5818
30
21
1.0
25
0.550
0.875
1.0
10
110
15
50
-65 to +125
1N5819
40
28
0.60
0.90
Notes:
1. Measured at ambient temperature at a distance of 9.5mm from the case.
2. Short duration test pulse used to minimize self-heating effect.
3. Measured at 1.0MHz and applied reverse voltage of 4.0V DC.
4. Thermal resistance from junction to lead vertical P.C.B. mounted, 0.375" (9.5mm) lead length with 1.5 x 1.5" (38 x 38mm)
copper pads.
5. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7.
Unit
V
V
A
A
V
mA
pF
°C/W
°C
DS23001 Rev. 8 - 2
1 of 3
www.diodes.com
1N5817-1N5819
ã Diodes Incorporated