C17AH620J-7UN-X0T Datasheet, PDF (1/4 Pages) Dielectric Laboratories, Inc. – AH Series: P90 Porcelain Capacitors

AH Series: P90 Porcelain Capacitors
Description
Functional Applications
Benefits
Porcelain Capacitors
Positive TC “P90”
Low ESR, High Q
Capacitance
Range 0.1 - 5100 pF
High Self-resonance
Low Noise
Established Reliability
Impedance Matching
DC Blocking
Bypass
Coupling
Tuning & Feedback
Amplifier Matching Networks
VCO Frequency Stabilization
Filtering, Diplexers & Antenna Matching
High RF Power Circuits
Oscillators
Timing Circuits
Filters
RF Power
Amplifiers & Delay Lines
Stable TC, -55° to +125°C Operating Range
High Q
SMD Compatibility
Lower ESR
Power Handling, High Voltage
Dielectric Characteristics
Dielectric
Material
Code
AH
Temperature
Coefficient
(ppm/°C
Maximum)
+90 ± 20
Dissipation
Factor
(% @ 1MHz
Maximum)
Dielectric Withstanding Voltage
Voltage Rating
(Volts)
DWV
(Volts)
Insulation Resistance
(MΩ Minimum)
@ +25°C @ +125°C
0.05
Please see
chart
(pg. 13)
250% of WVDC
for 5 sec unless
specified in chart
(pg. 13)
10⁶
10⁵
Aging Piezoelectric Dielectric
Effects Absorption
None None
None
Part Number Breakdown*
*C 17
Multi
Layer
Case Size
AH 620
Material
System
Capacitance
Code
J -7
Tolerance Voltage
Level
Code
U N-X
Termination Leading
Code
Code
Test Level
0
Marking
Code
T
Packaging
Available
Termination Types
C11 ^{T, U, S, Z, E, P, Q, Y, M, W, H, V, R}
C17 ^{T, U, S, Z, E, P, Q, Y, M, W, H, V, R}
C18 ^{U, Z, E, Y, W, H}
C22 ^{U, S, Z, E, P, Q, Y, M, W, H, V, R}
C40 ^{T, U, S, Z, E, P, Q, Y, M, W, H, V, R}
Code Termination System
T
Ag Term, Ni Barrier Layer, Heavy
SnPb Plated Solder
U
Ag Termination, Ni Barrier Layer,
SnPb Plated Solder
S
Ag Termination, Ni Barrier Layer,
Gold Flash, RoHS
Z
Ag Termination, Ni Barrier Layer,
Sn Plated Solder, RoHS
E
Ag Termination, Enhanced Ni Barrier,
Sn Plated Solder, RoHS
P
AgPd Termination, RoHS
Q
Polymer Termination, Ni Barrier
Layer, Sn Plated Solder, RoHS
Y
Polymer Termination, Ni Barrier
Layer, SnPb Plated Solder,
M
Polymer Termination, Cu Barrier
Layer, Sn Plated Solder, RoHS
W
Ag Termination, Cu Barrier Layer,
Sn Plated Solder
H
Ag Termination, Enhanced Cu Barrier,
Sn Plated Solder, RoHS
V
Ag Termination, Cu Barrier Layer,
SnPb Plated Solder
R
Ag Termination, Cu Barrier Layer,
Heavy SnPb Plated Solder
Available
Lead Types
C11 A, B, D
C17 A, B, C, D, E, F
C18 A, B, C, D, E, F
C22 A, B, C, D, E, F
C40 A, B, C, D, E, F
Special Leading
requirements available.
Code Lead Types
A Axial Ribbon
B Radial Ribbon
C Center Ribbon
D Customer
Specified
E Axial Wire
F Radial Wire
N None
Test Level –
All Case Sizes
X Standard
Y Reduced Visual
A MIL-PRF-55681
Group A
C MIL-PRF-55681
Group C
D Customer
Specified
*See page 6 for complete part number system.
Available
Laser Marking
C11 0, 1, 2, 5
C17 0, 1, 2, 3, 4, 5
C18 0, 1, 2, 5
C22 0, 1
C40 0, 1
Code Laser Marking
0 No marking
1 Single-side
marked
2 Double-side
marked
3 Large single-
side marked
4 Large double-
side marked
5 Vertical edge
marked
9 Customer
Specified
Available
Packaging
C11 T, V, W, B, P, S
C17 T, V, W, B, P, S
C18 T, V, W, B, P, S
C22 T, B, P, S
C40 T, B, P, S, R
Code Packaging
T Tape & Reel –
Horizontal
V Tape & Reel –
Vertical
W Waffle Pack
B Bulk
P Plastic Box
R Tube (Rail)
S Customer
Specified
www.dilabs.com
12