English
Language : 

MCR265 Datasheet, PDF (1/3 Pages) Digitron Semiconductors – THYRISTORS SCRs/55 Amps/50-800 Volts
DIGITRON SEMICONDUCTORS
MCR265 SERIES
THYRISTORS
SCRs/55 Amps/50-800 Volts
Available Non-RoHS (standard) or RoHS compliant (add PBF suffix).
Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number.
MAXIMUM RATINGS (TJ=25°C unless otherwise noted)
RATING
Peak Reverse Blocking Voltage (1)
MCR265-2
MCR265-4
MCR265-6
MCR265-8
MCR265-10
SYMBOL
VRRM
VALUE
50
200
400
600
800
UNIT
Volts
Forward Current (TC=70°C)
(All Conduction Angles)
Peak Non-repetitive Surge Current – 8.3 ms
(1/2 Cycle, Sine Wave)
IT(RMS)
IT(AV)
ITSM
55
35
550
Amps
Amps
Forward Peak Gate Power
Forward Average Gate Power
Forward Peak Gate Current
(300μs, 120 PPS)
PGM
PG(AV)
20
0.5
lGM
2.0
Watts
Watt
Amps
Operating Junction Temperature Range
TJ
-40 to +125
°C
Storage Temperature Range
Tstg
-40 to +150
°C
1. VRRM for all types can be applied on a continuous basis. Ratings apply for zero or negative voltage, however, positive gate voltage shall not be applied concurrent with negative
potential on the anode. Blocking voltages shall not be tested with a constant current source such that the voltage ratings of the devices are exceeded.
These devices are rated for use in applications subject to high surge conditions. Care must be taken to ensure proper heat sinking when the device is to be used at high sustained
currents.
THERMAL CHARACTERISTICS
CHARACTERISTIC
Thermal Resistance, Junction to Case
Thermal Resistance, Junction to Ambient
SYMBOL
RθJC
RθJA
MAX
0.9
60
UNIT
°C/W
°C/W
ELECTRICAL CHARACTERISTICS (TC = 25°C unless otherwise noted)
CHARACTERISTIC
SYMBOL
Peak Forward Blocking Voltage (TJ = 125°C)
MCR265-2
MCR265-4
MCR265-6
MCR265-8
MCR265-10
VDRM
Peak forward blocking current
(rated VDRM @ TJ = 125°C)
IDRM
Peak reverse blocking current
(rated VRRM @ TJ = 125°C)
IRRM
Forward “on” voltage(1)
(ITM = 110A)
VTM
Gate trigger current (continuous dc)
(Anode voltage = 12Vdc, RL = 100ohms)
IGT
(TC = -40°C)
Gate trigger voltage (continuous dc)
(Anode voltage = 12Vdc, RL = 100ohms)
VGT
Gate non-trigger voltage
(Anode voltage = rated VDRM, RL = 100ohms, TJ = 125°C)
VGD
144 Market Street
Kenilworth NJ 07033 USA
phone +1.908.245-7200
fax +1.908.245-0555
MIN
50
200
400
600
800
-
-
-
TYP
-
-
-
-
-
-
-
1.5
MAX
-
-
-
-
-
UNIT
Volts
mA
2.0
mA
2.0
Volts
1.9
-
20
50
-
40
90
-
1.0
1.5
0.2
-
-
sales@digitroncorp.com
www.digitroncorp.com
mA
Volts
Volts
Rev. 20130116
 ▷