English
Language : 

MCR101 Datasheet, PDF (1/2 Pages) Unisonic Technologies – SENSITIVE GATE SILICON CONTROLLED RECTIFIERS REVERSE BLOCKING THYRISTORS
DIGITRON SEMICONDUCTORS
MCR101-MCR104
SILICON CONTROLLED RECTIFIERS
Available Non-RoHS (standard) or RoHS compliant (add PBF suffix).
Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number.
MAXIMUM RATINGS (TC = 85°C unless otherwise noted)
Rating
Peak reverse blocking voltage
MCR101
MCR102
MCR103
MCR104
Forward current RMS (all conduction angles)
Peak forward surge current (1/2 cycle, sine wave 60 Hz, TA = 25°C)
Circuit fusing considerations (t = 1 to 8.3ms, TA = 25°C)
Forward peak gate power (TA = 25°C)
Forward average gate power (TA = 25°C)
Forward peak gate current (TA = 25°C, 300µs, 120PPS)
Reverse peak gate voltage
Operating junction temperature range @ rated VRRM and VDRM
Storage temperature range
Lead solder temperature (<1/16” from case, 10 sec. max.)
Symbol
VRRM
IT(RMS)
ITSM
I2t
PGM
PG(AV)
IGM
VGM
TJ
Tstg
-
Value
Unit
15
30
60
100
0.8
6.0
0.15
0.1
0.01
1.0
4.0
-65 to +85
-65 to +150
+230
Volts
Amps
Amps
A2s
Watts
Watts
Amps
Volts
°C
°C
°C
THERMAL CHARACTERISTICS
Characteristic
Thermal resistance, junction-to-case
Thermal resistance, junction-to-ambient
Symbol
RθJC
RθJA
Max
75
200
Unit
°C/W
°C/W
ELECTRICAL CHARACTERISTICS (RGK = 1000Ω)
Characteristic
Symbol Min Max
Unit
Peak forward blocking voltage(1) (TC = 85°C)
MCR101
MCR102
MCR103
MCR104
15
-
vDRM
30
-
60
-
100 -
Volts
Peak forward blocking current (Rated VDRM @ TC = 85°C)
Peak reverse blocking current (Rated VRRM @ TC = 85°C)
Forward “on” voltage(2) (ITM = 1.0A peak @ TA = 25°C)
Gate trigger current (continuous dc)(3) (VAK = 7Vdc, RL = 100Ω, TC = 25°C)
Gate trigger voltage (continuous dc) (VAK = 7Vdc, RL = 100Ω)
TC = 25°C
TC = -65°C
TC = 85°C
IDRM
IRRM
VTM
IGT
VGT
VGD
- 100
- 100
- 1.7
- 200
- 0.8
- 1.2
0.1 -
µA
µA
Volts
µA
Volts
Holding current (VAK = 7Vdc, initiating current = 20mA)
TC = 25°C
mA
IH
- 5.0
TC = -65°C
-
10
Note 1: VDRM and VRRM for all types can be applied on a continuous dc basis without incurring damage. Ratings apply for zero or negative gate voltage but positive gate voltage
shall not be applied concurrently with a negative potential on the anode. When checking forward or reverse blocking capability, thyristor devices should not be tested with a
constant current source in a manner that the voltage applied exceeds the rated blocking voltage.
Note 2: Forward current applied for 1.0 ms maximum duration, duty cycle ≤ 1.0%.
Note 3: RGK current is not included in measurement.
144 Market Street
Kenilworth NJ 07033 USA
phone +1.908.245-7200
fax +1.908.245-0555
sales@digitroncorp.com
www.digitroncorp.com
Rev. 20130128
 ▷