GA300 Datasheet, PDF (1/3 Pages) Microsemi Corporation – SCRs Commercial Nanosecond Switching Planar

DIGITRON SEMICONDUCTORS
GA300, GA300A, GA301, GA301A
SILICON CONTROLLED RECTIFIER
NANOSECOND SWITCHING PLANAR
Available Non-RoHS (standard) or RoHS compliant (add PBF suffix).
Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number.
MAXIMUM RANKINGS
Repetitive Peak Off State Voltage
Repetitive Peak On-State Current
Peak Gate Current
Average Gate Current
Reverse Gate Current
Reverse Gate Voltage
Storage Temperature Range
Operating Temperature Range
V_DRM
I_TRM
I_GM
I_G(AV)
I_GR
V_GR
GA300
GA300A
60V
Up to 100A
250 mA
25 mA
3 mA
5V
-65 to +150°C
0 to +125°C
GA301
GA301A
100V
ELECTRICAL CHARACTERISTICS (@ 25°C unless otherwise noted)
Test
Symbol Min Typical Max Units
Conditions
Delay Time
Rise Time ^{(Note 1)}
GA300, GA300A
Rise Time ^{(Note 1)}
GA301, GA301A
20
30
t_d
-
10
-
ns
15
25
t_r
-
ns
25
-
10
20
t_r
-
ns
20
-
I_G = 20 mA, I_T = 1 A
I_G = 30 mA, I_T = 1A
V_D = 60 V, I_T = 1 A
V_D = 60 V, I_T = 30 A ^{(Note 1)}
V_D = 100 V, I_T = 1A
V_D = 100 V, I_T = 30 A ^{(Note 1)}
Circuit Commutated Turn Off Time
GA300, GA301
GA300A, GA301A
0.8
2.0
t_q
-
µs
0.3
0.5
I_T = 1 A, I_R = 1 A, R_GK = 1K
Gate Trigger On Pulse Width
t_pg(on)
-
0.02
0.05
µs
I_G = 10 mA, I_T = 1 A
Off-State Current
Reverse Current ^{(Note 2)}
I_DRM
I_RRM
-
0.01
0.1
µA
V_DRM = Rating, R_GK = 1K, T = 25°C
-
20
100
V_DRM = Rating, R_GK = 1K, T = 125°C
-
1.0
10
mA
V_RRM = 30 V, R_GK = 1 K ^{(Note 2)}
Gate Trigger Voltage
0.4
0.6
0.75
V_GT
0.10
0.2
-
V
V_D = 5V, R_GS = 100 Ω, T = 25°C
V_D = 5 V, R_GS = 100 Ω, T = 125°C
Gate Trigger Current
I_GT
-
10
200
µA
V_D = 5 V, R_GS = 10 K
On-State Voltage
V_T
-
1.1
1.5
V
I_T = 2 A
Off-State Voltage – Critical Rate of Rise
dV/dt
15
30
-
V/µs
V_D = 30 V, R_GK = 1 K
Reverse Gate Current
I_GR
-
0.01
0.1
mA
V_GR = 5 V
Holding Current
0.3
2.0
5.0
I_H
0.05
0.4
-
mA
V_D = 5V, R_GK = 1 K, T = 25°C
V_D = 5 V, R_GK = 1 K, T = 125°C
Note 1 – I_G = 10 mA, Pulse Test: Duty Cycle < 1%.
Note 2 – Pulse test intended to guarantee reverse anode voltage capability for pulse commutation. Device should not be operated in the reverse blocking mode on a continuous
basis.
144 Market Street
Kenilworth NJ 07033 USA
phone +1.908.245-7200
fax +1.908.245-0555
[e-mail]
www.digitroncorp.com
Rev. 20130116