2N681 Datasheet, PDF (1/7 Pages) Knox Semiconductor, Inc – 25 and 35 Amp RMS SCRs

DIGITRON SEMICONDUCTORS
2N681-2N692, 2N5204-2N5207
SILICON CONTROLLED RECTIFIER
Available Non-RoHS (standard) or RoHS compliant (add PBF suffix).
Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number.
MAXIMUM RATINGS
Rating
RMS on-state current
Average on-state current
@ T_C
Peak one cycle surge @ 50 Hz
Peak one cycle surge @ 60 Hz
Fusing @ 50 Hz
Fusing @ 60 Hz
Gate current to trigger
Typical critical dv/dt exponential to V_DRM
Critical rate of rise
Typical junction temperature
Symbol
I_T(RMS)
I_T(AV)
T_C
I_TSM
I²t
I_GT
dv/dt
di/dt
T_J
2N681-2N692
25
16
-65 to +65
145
150
103
94
40
-
75-100
-65 to 125
2N5204-2N5207
35
22
-40 to +40
285
300
410
375
40
100
100
-40 to 125
Unit
A
A
°C
A
A
A²s
mA
V/µs
A/µs
°C
VOLTAGE RATINGS (Applied gate voltage zero or negative)
V_RRM, V_DRM
Maximum repetitive peak reverse and
V_RSM
Maximum non-repetitive peak reverse voltage
Part Number
off-state voltage
(V)
t_p ≤ 5 ms
(V)
T_J = -65 to +125°C
T_J = -65 to +125°C
2N681
25
35
2N682
50
75
2N683
100
150
2N685
200
300
2N687
300
400
2N688
400
500
2N689
500
600
2N690
600
720
2N691
700
840
2N692
800
960
T_J = -40 to 125°C
T_J = -40 to 125°C
2N5204
600
720
2N5205
800
960
2N5206
1000
1200
2N5207
1200
1440
ELECTRICAL CHARACTERISTICS
Symbol
Characteristics
I_T(RMS)
I_T(AV)
Maximum RMS on-state current
Maximum average on-state
current
@ T_C =
2N681-2N692
25
2N5204-
2N5207
35
16
22
-65 to +65
145
-40 to +40
285
I_TSM
Maximum peak one cycle,
non-repetitive surge current
150
300
170
340
180
355
103
410
I²t
Maximum I²t capability, for fusing
94
375
I²t
Maximum I²t capability for
individual device fusing
145
580
135
530
144 Market Street
Kenilworth NJ 07033 USA
phone +1.908.245-7200
fax +1.908.245-0555
Units
A
A
°C
A
A²s
A²s
Conditions
180° half sine wave conduction
50 Hz half cycle sine wave
or 6 ms rectangular pulse
60 Hz half cycle sine wave
or 5 ms rectangular pulse
50 Hz half cycle sine wave
or 6 ms rectangular pulse
60 Hz half cycle sine wave
or 5 ms rectangular pulse
Following any rated load
condition and with rated
V_RRM applied following
surge
Same conditions as above
except with V_RRM applied
following
surge = 0
t = 10 ms
t = 8.3 ms
t = 10 ms
t = 8.3 ms
Rated V_RRM applied
following surge, initial
T_J = 125°C
V_RRM = 0 following
surge, initial
T_J = 125°C
[e-mail]
www.digitroncorp.com
Rev. 20130116