English
Language : 

2N6236 Datasheet, PDF (1/3 Pages) New Jersey Semi-Conductor Products, Inc. – SILICON CONTROLLED RECTIFIERS
DIGITRON SEMICONDUCTORS
2N6236-2N6241
SILICON CONTROLLED RECTIFIERS
Available Non-RoHS (standard) or RoHS compliant (add PBF suffix).
Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number.
MAXIMUM RATINGS (TC = 110°C unless otherwise noted)
Rating
Symbol
Value
Unit
Repetitive peak forward and reverse blocking voltage (1)
(1/2 sine wave, RGK = 1000Ω, TC = -40 to +110°C)
2N6236
2N6237
2N6238
2N6239
2N6240
2N6241
VDRM
VRRM
30
50
100
200
400
600
Volts
Non-repetitive peak reverse blocking voltage
(1/2 sine wave, RGK = 1000Ω, TC = -40 to +110°C)
2N6236
2N6237
2N6238
2N6239
2N6240
2N6241
VRSM
50
100
150
250
450
650
Volts
Average on-state current
(TC = -40 to +90°C)
(TC = 100°C)
IT(AV)
2.6
1.6
Amps
Surge on-state current
(1/2 sine wave, 60Hz, TC = 90°C)
(1/2 sine wave, 1.5ms, TC = 90°C)
Circuit fusing (TC = -40 to +110°C, t = 8.3ms)
ITSM
25
Amps
35
I2t
2.6
A2s
Peak gate power (pulse width = 10µs, TC = 90°C)
PGM
0.5
Watts
Average gate power (t = 8.3ms, TC = 90°C)
PG(AV)
0.1
Watts
Peak forward gate current
IGM
0.2
Amps
Peak reverse gate voltage
VRGM
6
Volts
Operating junction temperature range
TJ
-40 to 110
°C
Storage temperature range
Tstg
-40 to 150
°C
Stud torque
6
In. lb.
Note 1: Ratings apply for zero or negative gate voltage. Devices shall not have a positive bias applied to the gate concurrently with a negative potential on the anode. Devices should not be tested
with a constant source for forward or reverse blocking capability such that the voltage applied exceeds the rated blocking voltage.
THERMAL CHARACTERISTICS
Characteristic
Thermal resistance, junction to case
Thermal resistance, junction to ambient
Symbol
RÓ¨JC
RÓ¨JA
Max
3
75
Unit
°C/W
°C/W
ELECTRICAL CHARACTERISTICS (TC = 25°C, RGK = 1000Ω unless otherwise noted)
Characteristic
Symbol Min
Peak forward or reverse blocking current
(Rated VDRM or VRRM)
TC = 25°C
TC = 110°C
IDRM,
IRRM
-
-
Peak forward “on” voltage
(ITM = 8.2A peak, pulse width = 1 to 2ms, 2% duty cycle)
VTM
-
Typ
-
-
-
Max
Unit
10
µA
200
Volts
2.2
144 Market Street
Kenilworth NJ 07033 USA
phone +1.908.245-7200
fax +1.908.245-0555
sales@digitroncorp.com
www.digitroncorp.com
Rev. 20130128