2N4199 Datasheet, PDF (1/6 Pages) Motorola, Inc – SILICON CONTROLLED RECTIFIERS

DIGITRON SEMICONDUCTORS
2N4199 – 2N4204
SILICON CONTROLLED RECTIFIERS
Available Non-RoHS (standard) or RoHS compliant (add PBF suffix).
Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number.
MAXIMUM RATINGS
Rating
Symbol
Value
Unit
Peak Reverse Blocking Voltage, Note 1 (T_J = 105°C)
Peak Forward Blocking Voltage, Note 1 (T_C = 105°C)
2N4199
2N4200
2N4201
2N4202
2N4203
2N4204
V_RRM
V_DRM
50
Volts
300
400
500
Volts
600
700
800
Repetitive Peak On-State Current
(PW = 3 µs, Duty Cycle = 0.6%, T_C = 85°C)
Continuous On-State Current (T_C = 65°C)
Current Application Rate, Note 2
I_TRM
I_T
di/dt
100
5
5000
Amps
Amps
A/µs
Peak Forward Gate Power
Average Forward Gate Power
Peak Forward Gate Current
Peak Gate Voltage – Forward
Reverse, Note 3
Operating Junction Temperature Range
Blocking State
Conducting State
P_GFM
P_GF(AV)
I_GFM
V_GFM
V_GRM
T_J
20
1
5
10
10
-65 to +105
-65 to +200
Watt
Watt
Amps
Volts
°C
Storage Temperature Range
Stud Torque
T_stg
-65 to +200
°C
-
15
In. lb.
Thermal resistance, junction to case
R_Ó¨JC
3
°C/W
Note 1: Characterized for unilateral applications where reverse blocking capability is not important. V_DRM and V_RRM may be applied as a continuous dc voltage for zero or negative
gate voltage but positive gate voltage must not be applied concurrently with a negative potential on the anode. When checking blocking capability, do not permit the applied
voltage to exceed the rated voltage.
Note 2: Minimum Gate Trigger Pulse: I_G = 200 mA, PW = 1 µs, t_r = 20 ns.
Note 3: Do not reverse bias gate during forward conduction if anode current exceeds 10 amperes.
ELECTRICAL CHARACTERISTICS (T_C = 25°C unless otherwise noted)
Characteristics
Symbol
Peak Forward or Reverse Blocking Current
(Rated V_DRM or V_RRM, gate open) T_C = 105°C)
I_DRM, I_RRM
Gate Trigger Current (Continuous dc)
(Anode Voltage = 7 Vdc, R_L = 100 ohms, T_C = 25°C)
I_GT
(Anode Voltage = 7 Vdc, R_L = 100 ohms, T_C = -65°C)
Gate Trigger Voltage (Continuous dc)
(Anode Voltage = rated V_DRM, R_L = 100 ohms, T_C = 105°C)
(Anode Voltage = 7 Vdc, R_L = 100 ohms, T_C = 25°C)
V_GT
(Anode Voltage = 7 Vdc, R_L = 100 ohms, T_C = -65°C)
Holding Current
(Anode Voltage = 7 Vdc, gate open, T_C = 105°C)
I_H
Forward “on” Voltage
(I_TM = 5 Adc, PW = 1 ms max, Duty Cycle ≤ 1%)
V_TM
Dynamic Forward “on” Voltage
(0.5 µs after 50% decay point on dynamic forward voltage waveform)
Forward Current: 30 A pulse
V_TM
Gate Pulse: at 200 mA, PW = 1 µs, t_r = 20 ns
Min
-
-
-
0.2
-
-
3
2.6
-
Max
2
50
100
-
1.5
2
-
-
25
Unit
mA
mA
Volts
mA
Volts
Volts
144 Market Street
Kenilworth NJ 07033 USA
phone +1.908.245-7200
fax +1.908.245-0555
[e-mail]
www.digitroncorp.com
Rev. 20130116