IW1700 Datasheet, PDF (12/12 Pages) Dialog Semiconductor – Zero Power No-Load Off-Line Digital PWM Controller

iW1700
Zero Power No-Load Off-Line Digital PWM Controller
About iWatt
iWatt Inc. is a fabless semiconductor company that develops intelligent power management ICs for computer, communication,
and consumer markets. The company’s patented pulseTrain™ technology, the industry’s first truly digital approach to power
system regulation, is revolutionizing power supply design.
Trademark Information
© 2012 iWatt, Inc. All rights reserved. iWatt, EZ-EMI and pulseTrain are trademarks of iWatt, Inc. All other trademarks and
registered trademarks are the property of their respective companies.
Contact Information
Web: https://www.iwatt.com
E-mail: [e-mail]
Phone: [phone]
Fax: [phone]
iWatt Inc.
675 Campbell Technology Parkway, Suite 150
Campbell, CA 95008
Disclaimer
iWatt reserves the right to make changes to its products and to discontinue products without notice. The applications
information, schematic diagrams, and other reference information included herein is provided as a design aid only and are
therefore provided as-is. iWatt makes no warranties with respect to this information and disclaims any implied warranties of
merchantability or non-infringement of third-party intellectual property rights.
iWatt cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in an iWatt product. No
circuit patent licenses are implied.
Certain applications using semiconductor products may involve potential risks of death, personal injury, or severe property
or environmental damage (“Critical Applications”).
iWatt SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, INTENDED, AUTHORIZED, OR WARRANTED TO
BE SUITABLE FOR USE IN LIFE‑SUPPORT APPLICATIONS, DEVICES OR SYSTEMS, OR OTHER CRITICAL
APPLICATIONS.
Inclusion of iWatt products in critical applications is understood to be fully at the risk of the customer. Questions concerning
potential risk applications should be directed to iWatt, Inc.
iWatt semiconductors are typically used in power supplies in which high voltages are present during operation. High-voltage
safety precautions should be observed in design and operation to minimize the chance of injury.
Rev. 1.2
iW1700
February 13, 2012

Page 12