DA9210 Datasheet, PDF (12/90 Pages) Dialog Semiconductor – Multi-Phase 12 A DC-DC Buck Converter

DA9210
DA9210 Multi-Phase 12 A DC-DC Buck Converter
3 Absolute Maximum Ratings
Table 5: Absolute Maximum Ratings
Param eter
TSTG
TJ
V SYS
All pins except above
De s cr iption
Storage temperature
Operating junction
temperature
Supply voltage
ESD protection HBM
Conditions (Note 1)
M in
Max Unit
-65
+150
°C
-40
+150
°C
Note 2
-0.3
5.5
V
-0.3 VSYS +
V
0.3
2000
V
Note 1
Note 2
Stresses beyond those listed under ‘Absolute maximum ratings’ may cause permanent damage to the
device. These are stress ratings only, so functional operation of the device at these or any other
conditions beyond those indicated in the operational sections of the specification are not implied.
Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
See Sections 11.1 and 8.6 for more detail
4 Recommended Operating Conditions
Table 6: Recommended Operating Conditions
Param eter
De s cr iption
Conditions
Min Typ Max Unit
V SYS
Supply voltage
2.8
5.5 V
V DD_IO
Supply voltage IO
1.2
3.6 V
Note
1
Maximum pow er
Derating factor above 1815 2310
mW
Dissipation Note 2
TA = 70 °C: 33 mW/°C
48 WL-CSP
Derating factor above 1540 1960
mW
TA = 70°C: 28 mW/°C
42 VF-BGA
Note 1 VDD_IO must not exceed VSYS
Note 2 Obtain from simulation on a 2S2P 4L JEDEC Board. Influenced by PCB technology and layout.
All voltages are referenced to V_SS unless otherwise stated. Currents flowing into DA9210 are deemed
positive, currents flowing out are deemed negative. All parameters are valid over the recommended
temperature range and power supply range unless otherwise noted. Please note that power
dissipation must be limited to avoid overheating of DA9210. Maximum power dissipation should not
be reached with maximum ambient temperature.
Datasheet
CFR0011-120-00
Revision 2.0
12 of 90
09-Sep-2016
© 2016 Dialog Semiconductor