IW1706 Datasheet, PDF (10/11 Pages) Dialog Semiconductor – Low-Power Off-Line Digital Green-Mode PWM Controller

iW1706
Low-Power Off-Line Digital Green-Mode PWM Controller
10.0 Physical Dimensions
5-Lead SOT Package
D
5
4
A
E1
E
A1
12 3
A2
e
B
C
e1
D
E
A1
A2 _A
E1
e
B
COPLANARITY
α^L
e1
SEATING
C
L
PLANE
α
0.10
Figure 10.1: Physical dimensions, 5-lead SOT-23 package
Compliant to JEDEC Standard MO178
Controlling dimensions are in millimeters
This package is RoHS compliant, and conform to Halide free limits.
Soldering Temperature Resistance:
[a] Package is IPC/JEDEC Std 020D Moisture Sensitivity Level 1
[b] Package exceeds JEDEC Std No. 22-A111 for Solder Immersion resistance;
packages can withstand 10 s immersion @ < 270 °C
Dimension D does not include mold flash, protrusions or gate burrs. Mold flash, protrusions
or gate burrs shall not exceed 0.25 mm per end. Dimension E1 does not include interlead flash
or protrusion. Interlead flash or protrusion shall not exceed 0.25 mm per side.
The package top may be smaller than the package bottom. Dimension D and E1 are determined
at the outermost extremes of the plastic body exclusive of mold flash, tie bar burrs, gate burrs and
interlead flash, but including any mismatch between the top and bottom of the plastic body.
Millimeters
MIN
MAX
-
1.45
0.0
0.15
0.90
1.30
0.30
0.50
0.08
0.22
2.90 BSC
2.80 BSC
1.60 BSC
0.95 BSC
1.90 BSC
0.30
0.60
0°
8°
11.0 Ordering Information
Part Number
iW1706-00
iW1706-01
iW1706-03
Options
Cable Comp = 0 mV
Cable Comp = 75 mV
Cable Comp = 225 mV
Package
SOT-23
SOT-23
SOT-23
Description
Tape & Reel¹
Tape & Reel¹
Tape & Reel¹
Note 1: Tape & Reel packing quantity is 3,000 per reel. Minimum ordering quantity is 3,000.
Rev. 1.1
iW1706
February 1, 2012

Page 10