HBGC4P-EU Datasheet, PDF (2/4 Pages) Dialight Corporation – DuroSite® Series LED High Bay Luminaire - CE Approved

DuroSite^® Series LED High Bay Fixture Options and Accessories
Variable Dimming Version: 0-10 VDC
Application:
Dialight offers a series of High Bay products with ACTIVE Dimming.
Dimming permits the user to select a specific light output and power con-
sumption to meet their requirements. The reduction in light output and
power consumption are approximately proportional. Reducing the light
output by 50% will reduce the power consumption by 50%. LEDs are par-
ticularly well suited for dimming as compared to other industrial light
sources.
(6) 1/4”-20 SELF TAPPING
SCREW HOLE
47.75 [1.88]
174.75
[6.88]
406.40
[16.00]
49.53
[1.95]
76.20
[3.00]
18-5/16” X .75” THREADED (2)
3.05m
[10’]
cord
406.40
[16.00]
Dimensions in mm [Inches]
Mechanical, Electrical and Photometric information is the same
as on page 1 except where detail is provided
1
Variable Dimming Cable : Dimming connections included in
factory installed 5 core cable. Multiple
high bays can be connected to the
same dimmer, consult dimming instruc-
tions and manufacturer
Variable Dimming
Control:
0-10 VDC active
Dimming Range
10 VDC = 100% light output
0 VDC = 15% light output
Features and Benefits
• 3 meter, 5 core PVC cable pre-installed
• Dimming cabling independent of fixture wiring
• Multiple High Bays can be connected to the same dimmer
• May also be configured to operate in a single STEP Dimming
configuration, please consult technical department
Order Codes:
Part Number
IP66
(Acrylic Lens)
2
IP66 to EN60529
(Polycarbonate Lens)
STEP Dimming Mode
The variable dimming High Bays may also be configured to operate in a
single STEP Dimming configuration. When the dimming control
conductors are connected together, the light output will be reduced to
approximately 15% of the maximum light output. The total fixture power
consumption will also be reduced to approximately 20% (30 W).
Connecting the leads together can be accomplished with a common
wall switch.
Lens
Optical Pattern
Clear Diffused Circular Aisle
3
CCT
Initial
Fixture
Lumens
Lumens
4
Per Watt
HB2C4M-EUD
HB7C4M-EUD
HB1C4N-EUD
•
HB6C4N-EUD
•
HB0C4M-EUD
HB4C4M-EUD
HB5C4N-EUD
•
HB3C4N-EUD
•
•
•
•
Cool White
10,000
71
•
•
• Cool White
9,750
70
•
•
Cool White 11,500
82
•
• Cool White
11,500
82
•
•
•
Cool White 10,000
71
•
•
• Cool White
10,750
77
•
•
Cool White
10,750
77
•
• Cool White
10,750
77
1_{Part numbers in the above table include 3M PVC cable, for units including an attached junction box replace prefix HB with HBJ in the order}
code, HB2C4M-EUD becomes HBJ2C4M-EUD. For mechanical drawing see page 4.
2_{Polycarbonate lens part numbers can be ordered with a factory installed dome lens. For dome lens option replace prefix HB with HBL in the}
order code, HB2C4M-EUD becomes HBL2C4M-EUD For mechanical drawing see page 4.
3_{Part numbers in the above table are cool white models, for neutral white replace the 3rd character C with N in the order code,}
HB2C4M-EUD becomes HB2N4M-EUD
4_{Lumens per Watt calutated based on 140W.}
www.dialight.com