VSM-CF-36L-5N Datasheet, PDF (1/2 Pages) Dialight Corporation – VEHICLE SLIM LIGHT SERIES

VEHICLE SLIM LIGHT SERIES
Frosted Lens Version
FEATURES / BENEFITS
p Ultra slim design, less than 1/2” (13mm) high
p 70% lumen maintenance @ 50,000+ hr life @ 25ºC
ambient temperature
p Low energy use, no IR or UV emissions
p Modular “quick connect” system for easy installation
p Designed for even LED spacing over linear runs, no
hotspots or dark spots between fixtures
p Cool to touch, suitable for direct mounting on flammable
surfaces
p Onboard constant current driver with low voltage input
p ETL listed to UL standards for dry locations
p Utilizes the latest high efficiency LED technology
APPLICATIONS
The VSM light has been designed for use in a wide range of interior bus and van lighting applications, areas which benefit from its ultra
slim profile, low energy and long operating life. With their slim modular design, the slim lights can be mounted in a variety of combinations
and positions to offer the best light output. Offering a superior light output and sleek and slim design, the VSM lights are a perfect solution
for interior lighting applications.
OPERATING CONDITIONS
MATERIALS/FINISH
p Ambient temperature -20ºC to +40ºC (-4ºF to +104ºF)
p Input voltage 10-30VDC. Use only class 2 power supplies
p Power consumption 5.3W per module
Does not include power supply losses
p Max # of modules connected per run = 20. Up to 16
modules can be operated on a 100W power supply
p Anodized aluminum module base with polycarbonate lens
p Plug & play connector system
p Onboard constant current driver
p 4 high output 1W LEDs per module
p 20AWG, PTFE cable - UL rated E213967, 300V, 80ºC
ORDERING INFORMATION
Part Number
VSM-CF-36L-5N
VSM-NF-36L-5N
LED Color
Cool White
Neutral White
Typical
CCT
5000K
4100K
Min Luminous
Flux per Module
(lumens)
288
242
Typical Luminous
Flux per Module
(lumens)
342
288
LED data is LED manufacturers test data at 25^ºC Tj. Light output at max acceptable ambient temp will be approximately 15-20% lower depending on the thermal
conductivity of the mounting surface. Clear lens will reduce fixture light output by additonal 8-10%, and frosted lens by additional 30%.
Connectors (sold separately)
CL2-E2E = End to end module connector
CL2-FLEX = 63mm / 2.5” flexible end to end connector
CL2-EXTEND = 952mm / 37.5” flexible end to end connector
CL2-START = 3m / 9’ 10” start cable (power supply to first module)
CL2-END = End plug
Dialight Corporation
1501 Route 34 South • Farmingdale, NJ 07727 USA
Tel: [phone] • Fax: [phone] • www.dialight.com
MDTBVSMCL2_A