MDU-18-V-25-100 Datasheet, PDF (1/2 Pages) Dialight Corporation – 20W VARIABLE MICRODRIVER

20W VARIABLE
MICRODRIVER
FEATURES / BENEFITS
p Universal input 110-240VAC
p Short and open circuit protected
p Fully isolated twin outputs
p Dimming by 1-10V or potentiometer
p Resetting thermal shutdown
p Rugged design with terminal cover & cable grip
p Over voltage protection
p Up to 1A output on single output operation
OPERATING CONDITIONS
p Operating ambient (Ta) -20ºC to +50ºC
p Max case temperature (Tc) 85ºC
p Storage temperature -20ºC to +60ºC
p Dry location only IP20 rated
DESCRIPTION
The 20W Variable Microdriver™ is an adjustable constant
current driver which can supply two output channels.
Adjustments are easily made using the single
potentiometer located on front cover.
Single output operation (Output 1 Only) 250mA to 1A
Dual output operation (Output 1 & Output 2) 250mA to
500mA per channel.
The driver is dimmable with 1-10V or potentiometer.
APPROVALS
Immunity
EMI / RFI
Performance
Safety
EN 61547
EN 55015 (Conducted)
EN 61000-3-2 (Harmonics)
EN 62384
EN 61347-2-13
APPLICATION
p Cove & Cornice Lighting
p Display Cases
p Spot Lights / Signage
p Architectural lighting and display lighting
p Marker & Orientation Lights
MECHANICAL DIMENSIONS
p Maximum case height 23.5mm (0.93 inches)
p Maximum case width 52mm (2.05 inches)
p Maximum case length 111mm (4.37 inches)
ORDERING INFORMATION
Part Number:-
MDU-18-V-25-100
Visit www.dialight.com for intall instructions.
Dialight reserves the right to make changes at any time
in order to supply the best product possible.
www.dialight.com