HZD2C2NC Datasheet, PDF (1/2 Pages) Dialight Corporation – SafeSite® LED Area Light with Retrofit Adapter Kit

SafeSite^® LED Area Light
with Retrofit Adapter Kit
Application:
The SafeSite^® LED area light saves at least 50% energy compared to
traditional HID light sources, while reducing maintenance and carbon
emissions in Class I, Div 2 applications. This light incorporates both cutting
edge LED technology along with proprietary optics to achieve area
lighting comparable with other traditional light sources.
Whether your application is in a refinery, oil platform, chemical plant or
any other Class I, Div 2 application, the LED area light offers long life and
requires minimal maintenance, improving safety and reliability.
The SafeSite LED Area Light with Retrofit Adapter Kit Luminaire is designed
for installations where the fixture to be replaced is installed in compliance
with all required codes. Installing the SafeSite LED Retrofit Luminaire is
compliant with electrical codes and standards and will not void UL listings
when installed in accordance with provided installation instructions.
9.7
[245]
10.6
[270]
10.4
[264]
Mechanical Information
Fixture Weight:
13.5lbs (6.1 kg)
Shipping Weight:
15.5lbs (7.0 kg)
Mounting:
See “Mounting Compatibility” section on
page 2
Cabling:
10” (0.25m) SOOW Power Cord
Electrical specifications
Operating Voltage:
100-277VAC, 50/60 Hz
Power Consumption:
Operating Temp:
43W / 55W / 70W
-40°F to +149°F (-40°C to +65°C)
Certifications
• Class I, Div 2, Groups A,B,C,D
• UL 1598/A
• CSA 22.2 No. 137-M1981
• IP66 (pending)
• NEMA 4X (pending)
Dimensions in Inches [mm]
Noise Requirements/
EMC:
Surge Protection:
THD:
Power Factor:
FCC Title 47, Subpart B, Section 15, class A
device. RF Immunity; 10V/m, 80MHz-1GHz
1 kV line to line
2 kV line to ground
<15%
> 0.9
Features & Benefits
• 5 year full performance warranty
• Instant on/off operation
• Universal input (100-277 VAC), 50/60Hz
• Mercury free
• Resistant to shock and vibration
• Temperature compensation technology for longer life
• L70 rated for >100,000 hours @ 25°C
• Factory sealed
• Low T rating compared to traditional fixtures
Temperature Ratings
Ambient Temperature Range
T4a Temperature Code
Ambient Temperature Range
T5 Temperature Code
Construction
Housing:
Powder coated aluminum
Finish:
Polyester / epoxy powder coat gray RAL
7040 for superior corrosion resistance
Lens:
Polycarbonate - UL1598A wet location
Photometric Information
CRI:
> 70
CCT:
5,700K (cool white)
4,300K (neutral white)
Optics:
180° f o r w a r d t h r o w
360° c i r c u l a r p a t t e r n
IES Files:
Available upon request
-40°F to +149°F (-40°C to +65°C) -40°F to +113°F (-40°C to +45°C)
Ordering Codes:
Part Number
HZD2C2NC
HZD3C2NC
HZD4C2NC
HZD5C2NC
HZD8C2NC
HZD9C2NC
Optical Pattern¹
180
360
180
360
180
360
Color²
Cool White
Cool White
Cool White
Cool White
Cool White
Cool White
Lumens
3,500
3,500
4,500
4,500
5,800
5,800
All values typical unless otherwise state
Watts
43
43
55
55
70
70
Lumens Per Watt
81
81
82
82
83
83
Replaces Up To
70W HID
70W HID
175W HID
175W HID
250W HID
250W HID
1_{180° optical pattern versions are optimized for a 45° mounting angle}
2_{Part numbers listed in the above table are cool white. For neutral white version replace the 5th character with N Ex: HZD2C2N becomes HZD2N2N}
www.dialight.com