HZC2C2N Datasheet, PDF (1/2 Pages) Dialight Corporation – SafeSite® Series LED Area Light

Application:
The SafeSite® Series LED area light represents the future of energy
efficient facility illumination for hazardous locations worldwide. The Class
I, Div 1 LED area lighting fixture consumes at least 50% energy compared
to traditional HID light sources, while reducing maintenance and carbon
emissions. This light incorporates both cutting edge LED technology
along with proprietary optics to achieve area lighting comparable with
other traditional light sources.
Patent Pending
SafeSite^® Series LED Area Light
CID1/CIID1 Version
Whether your application is in a refinery, oil platform, chemical plant or
any other Class I, Division 1 application, this fixture offers improved
performance across the board.
Mechanical Information
Fixture Weight:
14.5 lb (6.58 kg)
10.7
[272]
6.0
[152]
Shipping Weight:
Mounting:
16.5lb (7.48kg)
(1) Threaded 3/4” NPT rear
9.7
[246]
5.8
[148]
2.0
[51]
Ø.213
[5,41]
Cabling:
Electrical specifications
Operating Voltage:
Power Consumption:
Operating Temp:
10' (3.5m) SOOW power cord
100-277VAC, 50/60 Hz
43W / 55W / 70W
-40°F to +149°F (-40°C to +65°C)
Noise Requirements/
EMC:
FCC Title 47, Subpart B, Section 15, class A
device. RF Immunity; 10V/m, 80MHz-1GHz
Certifications
• Class I, Div 1, Groups B, C, D
• Class II, Div 1, Groups E, F, G
• UL 844
• UL 1598/A
• CSA 22.2 No. 137-M1981
• IP66 (pending)
• NEMA 4X (pending)
Ø.197
[5]
Dimensions in Inches [mm]
Features & Benefits
• 5 year full performance warranty
• Instant on/off operation
• Universal input (100-277 VAC), 50/60Hz
• Superior color rendition index compared to HPS, LPS, MV
• Mercury free
• Resistant to shock and vibration
• Temperature compensation technology for longer life
• L70 rated for >100,000 hours @ 25°C ambient
• Factory sealed
• Low T rating compared to traditional fixtures
Surge Protection:
THD:
Power Factor:
Construction
Housing:
Finish:
Lens:
1 kV line to line
2 kV line to ground
<15%
> 0.9
Powder coated aluminum
Polyester / epoxy powder coat gray RAL
7040 for superior corrosion resistance
Glass
Photometric Information
CRI:
> 70
CCT:
5,700K (cool white)
4,500K (neutral white)
Optics:
180° f o r w a r d t h r o w
360° f o r w a r d t h r o w
IES Files:
Available upon request
All values typical unless otherwise state
Temperature Ratings
Ambient Temperature Range
T4a Temperature Code
Ambient Temperature Range
T5 Temperature Code
Ordering Codes:
-40°F to +149°F (-40°C to +65°C) -40°F to +113°F (-40°C to +45°C)
Part Number Group B (Hydrogen)
Optical Pattern¹
Color²
Lumens
Watts Lumens Per Watt
HZC2C2N
180
Cool White
3,500
43
81
HZC3C2N
360
Cool White
3,500
43
81
HZC4C2N
180
Cool White
4,500
55
82
HZC5C2N
360
Cool White
4,500
55
82
HZC8C2N
180
Cool White
5,800
70
83
HZC9C2N
360
Cool White
5,800
70
83
HZP8C2N
•
180
Cool White
5,800
70
83
HZP9C2N
•
360
Cool White
5,800
70
83
1_{180° optical pattern versions are optimized for a 45° mounting angle}
2_{Part numbers listed in the above table are cool white. For neutral white version replace the 5th character with N Ex: HZC2C2N becomes HZC2N2N}
www.dialight.com