CL2-C-C Datasheet, PDF (1/2 Pages) Dialight Corporation – CL2 SERIES

CL2 SERIES
Frosted Lens Version
FEATURES / BENEFITS
p Ultra slim design, less than 1/2” (13mm) high
p 70% lumen maintenance @ 50,000+ hr life @ 25ºC
ambient temperature
p Low energy use, no IR or UV emissions
p Modular “quick connect” system for easy installation
p Designed for even LED spacing over linear runs, no
hotspots or dark spots between fixtures
p Cool to touch, suitable for direct mounting on flammable
surfaces
p Onboard constant current driver with low voltage input
p ETL listed to UL standards for dry locations
p Utilizes the latest high efficiency LED technology
APPLICATIONS
The CL2 Series is designed for use in a wide range of lighting applications, especially areas which benefit from its ultra slim
profile, low energy and long operating life. Designed around the latest LED technology, the CL2 series represents true
innovation in lighting, delivered in a package which blends seamlessly into it’s surroundings. Sample applications include, but not
limited to: Cove and cornice lighting, shelf lighting, integrated into furniture, under counters, stair hand rails, display cases, task lighting.
OPERATING CONDITIONS
MATERIALS/FINISH
p Ambient temperature -20ºC to +40ºC (-4ºF to +104ºF)
p Input voltage 24VDC. Use only class 2 power supplies
p Power consumption 5.3W per module
Does not include power supply losses
p Max # of modules connected per run = 20. Up to 16
modules can be operated on a 100W power supply
p Anodized aluminum module base with polycarbonate lens
p Plug & play connector system
p Onboard constant current driver
p 4 high output 1W LEDs per module
p 20AWG, PTFE cable - UL rated E213967, 300V, 80ºC
ORDERING INFORMATION
LED Color
Catalog
Number
(A)
Typical
CCT
Min Luminous Typical Luminous
Flux per Module Flux per Module CRI
(lumens)
(lumens)
Lens
(B)
Cool White
C
5000K
288
Neutral White
N
4100K
242
Warm White
W
3000K
204
High CRI Warm White
Z
3000K
171
342
75
C = Clear
288
75
242
75
F = Frosted
204
92
Note: Special colors available, consult factory.
LED data is LED manufacturers test data at 25^ºC Tj. Light output at max acceptable ambient temp will be approximately
15-20% lower depending on the thermal conductivity of the mounting surface. Clear lens will reduce fixture light output by
additonal 8-10%, and frosted lens by additional 30%.
Connectors (sold separately)
CL2-E2E = End to end module connector
CL2-FLEX = 63mm / 2.5” flexible end to end connector
CL2-EXTEND = 952mm / 37.5” flexible end to end connector
CL2-START = 3m / 9’ 10” start cable (supplies power to first module)
CL2-END = End plug
Dialight Lumidrives
York House • Weatherby Road • Long Marston, York, YO26 7NH
Tel: [phone] • Fax: [phone] • www.dialight.com
PRIVATE LABEL
OEM PROGRAM
Dialight Corporation
1501 Route 34 South • Farmingdale, NJ 07727 USA
Tel: [phone] • Fax: [phone] • www.dialight.com
MDEXLUMCL2_A