609-1122-120F Datasheet, PDF (1/2 Pages) Dialight Corporation – LED Panel Mount Indicators for 9.35mm Mounting Hole w/ Optional Watertight Capability

609 Series
LED Panel Mount Indicators
for 9.35mm Mounting Hole
w/ Optional Watertight Capability
FEATURES / BENEFITS
p RoHS compliant*
p Long Life - typically 100K hours
p Low power consumption - uses up to 90% less
energy than an incandescent indicator
p No heat generated
p Colors include red, green, and yellow
p Front panel mounting
p LED can be recessed or protrude from housing
(see figure below)
p Available Watertight version: NEMA 4x/IP66
APPLICATIONS
Dialight's 600 series of metric indicators are designed for a variety of
applications such as:
• Main and remote power indication
• Status Indication
• Maintenance and warning indication • Instrumentation
...and many more!
SPECIFICATIONS
p Voltage requirements: 6, 12 and 24 VDC
(no resistor required)
FIG. 1
p Electrical connection through solder
terminals
p Mounting hole size: 0.368 inches [9.35 mm]
p Maximum panel thickness:
0.376 inches [9.50mm]
w/ Gasket: 0.318 inches [8.0mm]
p Mounts with lock washer and nut
(0.362 lbs/ft or 5 Kg/cm torque recommended)
FIG. 2
p Operating Temperature : -30ºC to +85ºC
p Storage Temperature: -40ºC to + 85ºC
p Housing Material: Chrome plated brass or
Black painted brass
(See ordering note on back)
p Watertight Seal from front of panel meets
NEMA 4X/IP66
Dimensions in inches [mm]
All measurements are typical
*Compliant with exemption 6c, lead used as an alloying element in brass (up to 4% by weight)
Dialight Europe Ltd
Dialight reserves the right to make changes at any time
in order to supply the best product possible.
Dialight Corporation
Exning Road • Newmarket • Suffolk, United Kingdom, CB8 0AX
1501 Route 34 South • Farmingdale, NJ 07727 USA
Tel :[phone] • www.dialight.com
Tel: [phone] • Fax: [phone] • www.dialight.com
MDEL609X001_E