608-1131-110F Datasheet, PDF (1/2 Pages) Dialight Corporation – LED Panel Mount Indicators for 8mm Mounting Hole

608 Series
LED Panel Mount Indicators
for 8mm Mounting Hole
FEATURES / BENEFITS
RoHS compliant
Long life - typically 100k hours
Low power consumption - uses up to 90% less
energy than an incandescent indicator
No heat generated
Colors include red, green and yellow
Front panel mounting
Housing matches emitted color
APPLICATIONS
Dialight's 600 series of metric indicators are designed for a variety of
applications such as:
• Main and remote power indication
• Status Indication
• Maintenance and warning indication • Instrumentation
and much more!
SPECIFICATIONS
Voltage Requirements:
2 VDC (current limiting resistor required)
6, 12 & 24 VDC (no resistor required)
Electrical connection:
Leads (Figures 1 & 2)
Solder terminals (Figures 3 & 4)
Maximum panel thickness: See reverse side
Mounting hole sizes:
0.327 inches (8.3 mm) (Figures 1 & 2)
0.335 inches (8.5 mm) (Figures 3 & 4)
Mounts with lock washer and nut or snap fit
0.217 lbs/ft or 3 kg/cm torque recommended
(Figures 1 & 2 only)
Operating temperature:
-25^OC to +85^OC
Storage temperature:
-25^OC to +85^OC
Housing material:
Polycarbonate to match emitting color
FIG. 1
FIG. 3
FIG. 4
Dimensions in inches [mm]
All measurements are typical
FIG. 2
Dialight reserves the right to make changes at any time
in order to supply the best product possible.
Dialight Corporation
1501 Route 34 South • Farmingdale, NJ 07727 USA
Tel: [phone] • Fax: [phone] • www.dialight.com
MDEL608X001_C