607-1112-110F Datasheet, PDF (1/2 Pages) Dialight Corporation – LED Panel Mount Indicators for 7.2mm Mounting Hole w/ Optional Watertight Capability

607 Series
LED Panel Mount Indicators
for 7.2mm Mounting Hole
w/ Optional Watertight Capability
FEATURES / BENEFITS
p RoHS compliant*
p Long Life - typically 100K hours
p Lower Power consumption - uses up to 90% less energy
then an incandescent indicator
p No heat generated
p Colors include red, green and yellow
p Front panel mounting
p Available Watertight Version: NEMA 4X/ IP66
p Chrome or plastic housing:
LED Positions: (See Figures below)
Protruding (Fig 1,2)
Recessed (Fig 3,4)
Internal (Fig 5)
SPECIFICATIONS
FIG. 1
p Voltage requirements:
2 VDC (current limiting resistor required)
6, 12, 24 VDC (no resistor required)
p Electrical connection through solder
terminals
p Mounting hole size: 0.283 inches (7.2 mm)
p Maximum panel thickness:
(see reverse side)
p Mounts with lock washer and nut
0.362 lbs/ft or 5 Kg/cm torque
recommended
0.217 lbs/ft or 3 Kg/cm torque
recommended (Figure 5 only)
p Operating Temperature : -30ºC to +85ºC
p Storage Temperature: -40ºC to +85ºC
p Housing Material:
Protruding & Recessed positions:
Chrome plated brass or
Internal Position:
Polycarbonate to match emitting color -
(Figure 5)
FIG. 2
FIG. 3
FIG. 4
FIG. 5
p Watertight Seal from front of panel meets
NEMA 4X/IP66
Dimensions in inches [mm] All measurements are typical
*Compliant with exemption 6c, lead used as an alloying element in brass (up to 4% by weight)
Dialight Europe Ltd
Dialight reserves the right to make changes at any time
in order to supply the best product possible.
Dialight Corporation
Exning Road • Newmarket • Suffolk, United Kingdom, CB8 0AX
1501 Route 34 South • Farmingdale, NJ 07727 USA
Tel :[phone] • www.dialight.com
Tel: [phone] • Fax: [phone] • www.dialight.com
MDEL607X001_D