586-2701-220F Datasheet, PDF (1/2 Pages) Dialight Corporation – Single Chip BASED LED T 3 1/4 MINIATURE SCREW BASE (E10)

586 VIP Series
Variable Input 6-36 Volts DC
Single Chip BASED LED
T 3 ¹/4 MINIATURE SCREW BASE (E10)
FEATURES / BENEFITS
RoHS Compliant
Unique VIP technology provides 6-36 VDC operation
High brightness with low current draw - uses up to
90% less energy than an incandescent
Long life - typically 100K hours
True non-polarized configuration
No heat generated
Mounts directly into industry standard socket
Resistant to shock and vibration
AlInGaP and InGaN technology
Colors include red, green, yellow, blue and white
Dialight's line of based LED lamps is designed to directly replace
many popular subminiature and miniature incandescent lamps.
The benefits of LED technology over incandescent are significant:
They offer long life, are shock resistant, withstand vibration and
provide energy conservation.
SPECIFICATIONS
.37 [9.25]
Tinted Color Lens
1.187
[29.675]
.626
[15.65]
Measurements are typical
Dimensions are inches [mm]
Operating voltage: 6-36 VDC
Non-polarized
Operating temperature: -30^oC to +85^oC
Storage temperature: -40^oC to +100^oC
Replaces incandescent lamp numbers:
40, 46, 1481, 1487, 1821*
* See Dialight’s Incandescent lamp/based LED
cross reference for a complete listing
CONSIDERATIONS
Since lens caps act as filters for the light emitted from the based LED, it is important to match the emitting color of the LED. If not
matched properly, the overall light output may be substantially reduced. Dialight recommends using transparent lenses, which will
optimize the light output.
Operation of the based LED at a higher voltage should not exceed 10% above the recommended voltage.
Dialight does not recommend that based LED lamps be used in neon sockets.
Dialight reserves the right to make changes at any time
in order to supply the best product possible.
Dialight Corporation
1501 Route 34 South • Farmingdale, NJ 07727 USA
Tel: [phone] • Fax: [phone] • www.dialight.com
MDEL586MSVIP001_C