558-1501-001F Datasheet, PDF (1/2 Pages) Dialight Corporation – Snap-in LED Panel Mount Indicators

558 Series - Daylight Viewable
Snap-in LED
Panel Mount Indicators
FEATURES / BENEFITS
RoHS compliant
Long life - typically 100K hours
High Brightness for daylight viewing
Non-tinted/Non-diffused or Tinted/Non-diffused LED
Low power consumption - uses up to 90% less energy
than an incandescent indicator
Front panel snap-in mounting requires no additional hardware
No heat generated
Resistant to shock and vibration
Termination - straight terminals for wire wrapping or
lead wire for soldering or optional terminals
Colors include - red, green, yellow. blue and white
APPLICATIONS
Dialight's 558 series LED panel mount indicator is available with
a variety of LEDs including AlInGaP and InGaN technology for
high brightness applications, bicolor and integral resistors. These
indicators are designed for a variety of applications such as:
• Main and remote power indication
• Maintenance and warning indication
• Status indication • Instrumentation
……..and many more!
SPECIFICATIONS
Voltage requirements:
2.1 - 3.5 VDC typical (current limiting resistor required)
Mounting hole size: 0.155 -0.158" (3.94 - 4.01 mm)
Panel thickness: 0.031-0.062" (.787 - 1.57 mm)
Housing: Black housing material meets
UL94V-0 and enhances LED contrast
Operating temperature: -55°C to +100°C
Storage temperature: -55°C to +100°C
Electrical connection
Straight terminals for wire wrapping or either
6 or 14 inch 26 AWG lead wire
STRAIGHT TERMINALS - TERMINATION OPTION 1
*26 AWG 6” WIRE LEADS - TERMINATION OPTION 3
26 AWG 14” WIRE LEADS - TERMINATION OPTION 7
Dimensions in mm [inches]
*
NOTE: WIRE LEAD COLOR RED (ANODE) AND BLACK (CATHODE)
Dialight reserves the right to make changes at any time
in order to supply the best product possible.
Please see back of page for part numbers and additional specifications.
Dialight Corporation
1501 Route 34 South • Farmingdale, NJ 07727 USA
Tel: [phone] • Fax: [phone] • www.dialight.com
MDEL558DV001_B