558-0102-001F_12 Datasheet, PDF (1/2 Pages) Dialight Corporation – 558 Series Snap-in LED - .156” Mounting Hole

558 Series
Snap-in LED - .156” Mounting Hole
Panel Mount Indicators
ø .190
(4.83)
ANODE
LEAD
.20
(.51)
SQ. TYP
NOM
.100±.015
(2.54±0.38)
“A”±.015
“B”±.020
Min. .755
.040 RED
(1.01) WIRE
MIN
CATHODE
LEAD
PIN 2
ø .3mm LED
ø .190
(4,83)
“A”±.015
“B”±.020
.125
(3,17)
REF.
See
Termination
BLACK
WIRE
PIN 1
HOUSING
(VALOX)
.500±.032
(12.7±0.81)
PIN 2
ANODE
PIN 1
CATHODE
(+)
(-)
SINGLE COLOR LED SCHEMATIC
PIN 2
GREEN
CATHODE
PIN 1
RED CATHODE
FOR R/G LED
YELLOW CATHODE
FOR Y/G LED
BI-COLOR LED SCHEMATIC
Features & Benefits
• RoHS compliant
• Long life - typically 100K hours
• Low power consumption - uses up to 90% less energy
than an incandescent indicator
• Front panel snap-in mounting requires no additional hardware
• No heat generated
• Resistant to shock and vibration
• Termination - straight terminals for wire wrapping or
lead wire for soldering or optional terminals
• Three leaded bicolor version allows for additional color variations
• Available with PVC-free lead wires
Application
Dialight's 558 series LED panel mount indicator is available with a variety
of LEDs including AlInGaP and InGaN technology for high brightness
applications, bicolor and integral resistors. These indicators are
designed for a variety of applications such as:
• Fan tray assemblies
• Datacenter Infrastructure (Servers and Storage)
• Networking Equipment (Switches and routers)
• Storage Networking Hardware (Fibre channel host bus adapter cards)
• Next-Gen Wireless Infrastructure
• Electronic Test & Measurement Instruments
• Communications Testing Equipment
• Process controls
• Automation
• Medical Equipment
• Handheld devices
Mechanical Information
Mounting Hole Size: 0.155 - 0.158" (3.94 - 4.01 mm)
Panel Thickness:
0.031 - 0.062" (.787 - 1.57 mm)
Electrical Specifications
Operating Voltage:
1.8 - 2.1 VDC typical (current limiting resistor
required)
5 VDC typical (resistor not required)
Operating Temp:
See table
Storage Temp:
(-67°F to +212°F) -55°C to +100°C
Electrical connection: Straight terminals for wire wrapping or either
6 or 14 inch 24 AWG lead wire
Leads:
Construction
Straight leads
2 leads
Housing:
Black housing material meets:
UL94V-0 and enhances LED contrast
www.dialight.com