550-3X09 Datasheet, PDF (1/2 Pages) Dialight Corporation – 5mm LED CBI Circuit Board Indicator 3 Leaded, Bi-Color, Common Cathode

5mm
LED CBI^® Circuit Board Indicator
3 Leaded, Bi-Color, Common Cathode
550-3x09
7.62
[.300]
6.40
[.252]
7.62
[.300]
3.81
[.150]
RED OR
YELLOW
ANODE
2.54
[.100]
.635
[.025]
4.83
[.190]
GREEN
.508 ANODE
[.020]
SQ.
2.54
COMMON
[.100]
CATHODE
1.09 RECOMMENDED
2.54 2.54 [.043] HOLE PATTERN
[.100] [.100]
Dimensions in mm[inches]
9.65
[.380]
7.24
[.285]
PART NO.
550-3509
550-3609
COLOR
Red/Green
Yellow/Green
To order any of the 550-3x09 part numbers with
3.68 ^{Reverse Polarity (Red or Yellow Anode Right;}
[.145] _{Green Anode Left), please add -010 to}
the part numbers shown above.
NEW
Features
• Common Cathode simplifies design, and the red/green LED
provides yellow-orange as a third color
• Multiple CBIs form horizontal LED arrays on 7.62mm
(0.300”) center-lines.
• High Contrast, UL 94 V-0 rated, black housing
• Oxygen index: 32%
• Polymer content: PBT, 0.414 g
• Housing stand-offs facilitate PCB cleaning
• Solderability per MIL-STD-202F, method 208F
• LEDs are safe for direct viewing per IEC 825-1, EN-60825-1
Tolerance note: As noted, otherwise:
• LED Protrusion: ±0.04 mm [±0.016]
• CBI Housing: ±0.02mm[±0.008]
PART NUMBER ORDERING CODE
550 – 3x09 – 010
Reverse Polarity Option
1) Red or Yellow Anode Right;
Green Anode Left
–010 Ordering Code Suffix required ONLY for Reverse Polarity Option
Typical Operating Characteristics (T_A=25°C)
See LED data sheet for additional information
See page 6-55 and 6-56 for Reference Only LED Drive Circuit Examples. See page 6-57 for Pin Out
Part Number
Peak
IV
Color Wavelength nm mcd
550-3509 Red/Green 635/565
5/8
550-3609 Yellow/Green 583/565
5/8
VF
Volts
2.1/2.3
2.1/2.1
Test
Current (mA)
10
10
Viewing
Angle 2Θ½
65°
65°
LED
Data sheet
521-9450
521-9460
Page #
6-45
6-45
6-22 ^{Dialight Corporation • 1501 Route 34 South • Farmingdale, NJ 07727 • TEL: [phone] • FAX: [phone] •www.dialight.com}