550-3X05 Datasheet, PDF (1/2 Pages) Dialight Corporation – 5mm LED CBI Circuit Board Indicator 3 Leaded, Bi-Color, Common Cathode

5mm
LED CBI^® Circuit Board Indicator
3 Leaded, Bi-Color, Common Cathode
550-3x05
7.24
[.285]
MAX
GREEN
ANODE
2.54
[.100]
7.24
[.285]
MAX
Ø 4.83
[.190]
5.511
[.217]
8.64
[.340]
3.58
[.141]
5.08
[.200]
MAX
COMMON
CATHODE
YELLOW OR RED
ANODE
3.68
[.145]
4.82
[.190]
2.54
[.100]
CATHODE
.508 SQ.
[.020]
RECOMMENDED
P.C. BOARD
LAYOUT
5.08
[.200]
1.02
[.040]
2.54
[.100]
Dimensions in mm[inches]
Standard polarity shown in drawing
Features
• Common Cathode simplifies design, and the red/green LED
provides yellow-orange as a third color
• Multiple CBIs form horizontal LED arrays on 7.24mm
(0.285”) center-lines.
• High Contrast, UL 94 V-0 rated, black housing
• Oxygen index: 32%
• Polymer content: PBT, 0.462 g
• Housing stand-offs facilitate PCB cleaning
• Solderability per MIL-STD-202F, method 208F
• LEDs are safe for direct viewing per IEC 825-1, EN-60825-1
PART NO.
550-3505
550-3605
COLOR
Red/Green
Yellow/Green
To order any of the 550-3x05 part numbers with
Reverse Polarity (Green Anode Right; Yellow or Red
Anode Left), please add -010 to
the part numbers shown above.
NEW
Tolerance note: As noted, otherwise:
• LED Protrusion: ±0.04 mm [±0.016]
• CBI Housing: ±0.02mm[±0.008]
PART NUMBER ORDERING CODE
550 – 3x05 – 010
Reverse Polarity Option
1) Green Anode Right;
Yellow or Red Anode Left
–010 Ordering Code Suffix required ONLY for Reverse Polarity Option
Typical Operating Characteristics (T_A=25°C)
See LED data sheet for additional information
See page 6-55 and 6-56 for Reference Only LED Drive Circuit Examples. See page 6-57 for Pin Out
Part Number
Peak
IV
Color Wavelength nm mcd
550-3505 Red/Green 635/565
5/8
VF
Volts
2.1/2.3
Test
Current (mA)
10
Viewing
Angle 2Θ½
65°
LED
Data sheet
521-9450
Page #
6-45
550-3605 Yellow/Green 583/565
5/8
2.1/2.1
10
65°
521-9460
6-45
6-20 ^{Dialight Corporation • 1501 Route 34 South • Farmingdale, NJ 07727 • TEL: [phone] • FAX: [phone] •www.dialight.com}