515-1054 Datasheet, PDF (1/1 Pages) Dialight Corporation – 2 x 5mm Rectangular Optopipe Optical Light Pipe, Single

2 x 5mm Rectangular
® _Optopipe®
Optical Light Pipe, Single
3.30
[.130]
2.00
[.080]
DIFFUSED
FRONT
SURAFCE
FRONT
PANEL
5.08
[.200]
2.29
[.090]
4.32
[.170]
1.65
[.065]
7.62
[.300]
1.14
[.045]
FRONTPANELNOTSHOWN INTHIS VIEW
11.43
[.450]
8.89
[.350]
3.18
[.125]
8.89
[.350]
2.79
[.11]
Ø2.01
[.079]
2 PLCS
1.65
[.065]
4.45
[.175]
7.62 ±.08
[.300 ±.003]
2.21
[.087]
DIRECTION
OF LIGHT
2.41
[.095]
TYP
5.00
[.197]
Ø .076±.002
TYP; 2 PLCS
RECOMMENDED SOLDEARD/PHOLE LYAOUT
NOTE: designed for
post-reflow
PC board insertion.
Dimensions in mm [inches]
Features
• Compatible with Dialight’s 515-1051
• High transmissivity polycarbonate material
• UL94V-0 compliance
• ESD protection (circuit isolation from front panel)
• Wide viewing angle
• Secures to PCB by press-fit
515-1054
MicroLED SMT LEDs
for use with 515-1054
PART NO.
Recommeded
597-3xx1-2xx
597-77x1-2xx
Alternatives
597-3xx1-5xx
597-77x1-5xx
PAGE #
1-21
1-23
1-30
1-31
LED alternatives may not produce optimum light
output
Solder Pad/Holes layout shown is for single color
LEDs listed under “Recommended” category
Contact factory for other layouts
LED Data
For absolute maximum ratings and other electrical and optical
data on the recommended LEDs, refer to LED data sheets.
Operating/Storage Temperature
–30°C to +100°C
Dialight Optopipe Light Pipe Description
This Optopipe^® functions as a through-the-case indicator with the appearance of a single 2 x 5mm rectangular LED. It
can utilize either a single or multi-color SMT LED, and can be used to form longer arrays with the 515-1051 light pipe. It is
held to the PCB by 2 press-fit pins. The light pipe material is water clear transmissive polycarbonate rated UL94-V0, and
has a 35% oxygen index.
Dialight can provide custom Optopipe^® solutions for your applications.
Dialight Corporation • 1501 Route 34 South • Farmingdale, NJ 07727 • TEL: [phone] • FAX: [phone] •www.dialight.com