515-1038 Datasheet, PDF (1/1 Pages) Dialight Corporation – 5.8mm Round Optical Light Pipe, Single

5.8mm Round
® _Optopipe®
Optical Light Pipe, Single
515-1038
11.68
[.460]
5.84
[.230]
Ø 5.84
[.230]
22.35
[.880]
FRONT PANEL
10.92
[.430] 8.13
[.320] 5.3
[.21]
4.39
[.173]
8.79
[.346]
CURVED&
DIFFUSED FRONT
SURFACE
2.54
[.100]
Ø 2.95
[.116] MOUNTING
PINS; (2) PLACES
1.09
[.043]
TYP
.41
[.016]
TYP
1.50
[.059]
TYP
.76
[.030]
[Ø .113 ±.002]
TYP; 2 PLCS
8.79 ±.08
[.346 ±.003]
1.50
[.059]
TYP
DIRECTION
OF LIGHT
RECOMMENDED SOLDER PAD/HOLES LAYOUT
3.81
[.150]
18.54
[.730]
25.40
[1.00]
7.62
[.300]
NOTE: designed for
post-reflow
PC board insertion.
Dimensions in mm [inches]
Features
• High transmissivity polycarbonate material
• UL94V-0 compliance
• ESD protection (circuit isolation from front panel)
• Wide viewing angle
• Secures to PCB by press-fit
MicroLED SMT LEDs
for use with 515-1038
PART NO.
Recommended
597-3xx1-2xx
597-77x1-2xx
Alternatives
597-3xx1-1xx
597-3xx1-4xx
597-3xx1-5xx
597-77x1-1xx
597-77x1-5xx
PAGE #
1-21
1-23 & 1-24
1-19
1-28
1-30
1-20
1-31
LED alternatives may not produce optimum light
output
Solder Pad/Holes layout shown is for bi-color
LEDs listed under “Recommended” category
Contact factory for other layouts
LED Data
For absolute maximum ratings and other electrical and optical
data on the recommended LEDs, refer to LED data sheets.
Operating/Storage Temperature
–30°C to +100°C
Dialight Optopipe^® Light Pipe Description
This Optopipe^® is a shorter version of 515-1039. The light pipe material is water clear transmissive polycarbonate rated
UL94-V0, and has a 35% oxygen index.
Dialight can provide custom Optopipe^® solutions for your applications.
Dialight Corporation • 1501 Route 34 South • Farmingdale, NJ 07727 • TEL: [phone] • FAX: [phone] •www.dialight.com