515-1029 Datasheet, PDF (1/1 Pages) Dialight Corporation – 2.4 x 5mm Rectangular

2.4 x 5mm Rectangular
® _Optopipe®
Optical Light Pipe, 5 Array
22.61
[.890]
2.44
[.096]
TYP
8.38
[.33]
5.08
[.200]
10.16
[.400]
P_Do_Il_Fis_Fh_Ue_Sd_ED
FFrRoOntNT
SuPrAfaNcEeL
3.48
[.137]
4.98
[.196]
TYP
5.84
[.230]
FRONT
PANEL
11.73
[.462]
BREBArKe-aOkF-oFffPPOoINinTtsS
FORF“oBrL“ABNlaKnINkiGngOOU”uT”t
POPSoITsIiOtioNnSs
4.09 4.57
[.161] [.180]
2.54
[.100]
20.32
[.800]
15.24
[.600]
10.16
[.400]
1.09
[.043]
1.52
[.060]
6.35
[.251]
5.08
[.200]
1.45
[.057]
TYP
.41
[.016]
TYP
10.1106.1±6.08
[.40[0.4±0.0]03]
±.003
7.59
[.299]
Ø1.93 ±.05
[.076 ±.002]
TYP; 2 PLCS
RECOMMENDED SOLDER PAD/HOLES LAYOUT
DIRECTION
DireOcFtioLnIGHT
of Light
NOTE: designed for
post-reflow
PC board insertion.
Dimensions in mm [inches]
Features
• High transmissivity polycarbonate material
• UL94V-0 compliance
• ESD protection (circuit isolation from front panel)
• Wide viewing angle
• Arrays reduce insertion costs
• Secures to PCB by press-fit
515-1029
MicroLED SMT LEDs
for use with 515-1029
PART NO.
Recommended
597-3xx1-2xx
597-77x1-2xx
Alternatives
597-3xx1-5xx
597-77x1-5xx
PAGE #
1-21
1-23 & 1-24
1-30
1-31
LED alternatives may not produce optimum
light output
Solder Pad/Holes layout shown is for bi-color
LEDs listed under “Recommended” category
Contact factory for other layouts
LED Data
For absolute maximum ratings and other electrical and optical
data on the recommended LEDs, refer to LED data sheets.
Operating/Storage Temperature
–30°C to +100°C
Dialight Optopipe^® Light Pipe Description
This Optopipe^® mimics a 5-position array of 2 x 5mm LEDs, and functions as a through-the-panel indicator. Each ele-
ment has a diffused viewing surface and a shallow V-groove that permits easy customer removal of unwanted elements.
The array is held in place by 2 press-fit pins located beneath the second and fourth elements. The recommended light
sources are Dialight's 597 Series PLCC-2 or PLCC-4 Type SMT LEDs. The SMT LEDs are mounted in a straight line under
the rear of the part on a 5.08mm pitch. The light pipe material is water clear transmissive polycarbonate rated UL94-V0,
and has a 35% oxygen index.
Dialight can provide custom Optopipe^® solutions for your applications.
Dialight Corporation • 1501 Route 34 South • Farmingdale, NJ 07727 • TEL: [phone] • FAX: [phone] •www.dialight.com