515-1027 Datasheet, PDF (1/1 Pages) Dialight Corporation – 1.1mm Round Optopipe® Optical Light Pipe, Panel Mount

1.1mm Round
NEW
® _Optopipe®
Optical Light Pipe, Panel Mount
515-1027
.51 MAX
[.02]
8.26
[.325]
.80
[.031]
TOP SURFACE LED
5.54
[.217]
Dimensions in mm [inches]
DIRECTION OF
LIGHT
DIFFUSED
FRONT
SURFACE
Ø 1.68
Ø [.066]
RIBS:
(3) PLACES
120° APART
Ø 2.26
Ø [.089]
Ø 1.83
Ø [.072]
Alternative
MicroLED SMT LEDs
for use with 515-1027
PART NO.
597-2xx1-4xx
597-2x01-2xx
PAGE #
1-29
1-25
LED alternatives may not produce optimum
light output
Features
• High transmissivity polycarbonate material
• UL94V-0 compliance
• ESD protection (circuit isolation from front panel)
• Arrays reduce insertion costs
• Designed to replace 5mm right angle through-hole device
• Secures to Panel by press-fit
LED Data
For absolute maximum ratings and other electrical and optical
data on the recommended LEDs, refer to LED data sheets.
Operating/Storage Temperature
–30°C to +100°C
Dialight Optopipe Light Pipe Description
This Optopipe’s^® light emitting surface appears bright and uniformly luminous. It is reliably held in the panel by 3 press-
fit splines. This Optopipe^® functions as a through-the-case indicator with a textured finish on its light-emitting surface that
increases its viewing angle. The light source can be any super-bright 2mm, 3mm, or 5mm LED, or one of Dialight’s 597
Series SMT LEDs. The emitting surface of the light source should be located no more than 0.020" or 0.5mm from the
Optopipe^®. The light pipe material is water clear transmissive polycarbonate rated UL94-V0, and has a 35% oxygen index.
Dialight can provide custom Optopipe^® solutions for your applications.
Dialight Corporation • 1501 Route 34 South • Farmingdale, NJ 07727 • TEL: [phone] • FAX: [phone] •www.dialight.com