ESDCSA0402V05 Datasheet, PDF (2/5 Pages) Surge Components – Trigger and clamping voltage are measured per IEC61000-4-2 8KV

Absolute Maximum Ratings
Parameter
Maximum Contact discharge voltage Per IEC61000-4-2
Maximum Air discharge voltage Per IEC61000-4-2
Maximum Operating temperature
Maximum Storage temperature
Maximum lead temperature for soldering during 10s
Symbol
---
---
TOPER
TSTG
TL
Value
15KV
25KV
-40 to +90
-55 to +125
260
ESDCSA0402V05
Unit
V
V
Electrical Characteristics(TA=25℃)
Parameter
Symbol Test Conditions
Rated Voltage
VR
---
Min Typ
Max Units
---
---
5
V
Trigger voltage
VT
IEC61000-4-2 8KV contact discharge
---
350
---
V
Clamping voltage
VC
IEC61000-4-2 8KV contact discharge
---
35
---
V
Leakage current
IL
DC 5V shall be applied on component
---
0.10
uA
Capacitance
CP
VR = 0V, f = 1MHz
---
0.15
pF
Note: 1 Trigger and clamping voltage are measured per IEC 61000-4-2, 8KV contact discharge method.
2 After reliability tests such as high temp storage, temp cycles, continuous ESD strike etc, the maximum
leakage current is less than 10uA.
ESD Clamping Test
ESD TESTER
RZ
CZ
450 Ω
RG 223/U
50 Ω coax
10×
ATTENUATOR
4 GHz DIGITAL
OSCILLOSCOPE
50 Ω
IEC 61000-4-2 network
C_Z = 150 pF; R_Z = 330 Ω
DUT (DEVICE UNDER TEST)
2
Doc.No.SSME/JS-100-0047
@copyright Semitel 2011