S1A Datasheet, PDF (1/2 Pages) Pan Jit International Inc. – SURFACE MOUNT RECTIFIER(VOLTAGE - 50 to 1000 Volts CURRENT - 1.0 Ampere)

S1A THRU S1M
1.0 AMP SURFACE MOUNT SILICON RECTIFIERS
FEATURES
* Ideal for surface mount applications
* Easy pick and place
* Built-in strain relief
* High surge current capability
MECHANICAL DATA
* Case: Molded plastic
* Epoxy: UL 94V-0 rate flame retardant
* Terminals: Solder plated, solderable per MIL-STD-202F,
method 208 guranteed
* Polarity: Color band denotes cathode end
* Mounting position: Any
* Weight: 0.066 gram
* ^{Lead Free Finish/RoHS Compliant}
VOLTAGE RANGE
50 to 1000 Volts
CURRENT
1.0 Ampere
DO-214AC
.058(1.47)
.052(1.32)
.095(2.40)
.075(1.90)
.060(1.52)
.030(0.76)
.177(4.50)
.155(3.90)
.110(2.79)
.100(2.54)
.012(0.31)
.006(0.15)
.0008(.203)
.0004(.102)
.208(5.30)
.192(4.90)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating 25 C ambient temperature uniess otherwies specified.
Single phase half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
TYPE NUMBER
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
Peak Forward Surge Current, 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
Maximum Instantaneous Forward Voltage at 1.0A
Maximum DC Reverse Current
Ta=25 C
at Rated DC Blocking Voltage
Ta=100 C
Typical Junction Capacitance (Note 1)
Typical Thermal Resistance RqJA (Note 2)
Operating and Storage Temperature Range Tj, TSTG
NOTES:
1. Measured at 1MHz and applied reverse voltage of 4.0V D.C.
2. Thermal Resistance from Junction to Ambient.
S1A S1B S1D S1G S1J ^{S1K S1M UNITS}
50 100 200 400 600 800 1000 V
35
70 140 280 420 560 700 V
50 100 200 400 600 800 1000 V
1.0
A
30
A
1.1
V
5.0
υA
50
υA
15
pF
50
C/W
-65 +150
C
http://www.bytesonic.com.tw/
Version 1.1
2013/2/27