RS1AF Datasheet, PDF (1/2 Pages) Pan Jit International Inc. – SURFACE MOUNT FAST RECOVERY RECTIFIER

RS1AF THRU RS1MF
1.0 AMP FAST RECOVERY RECTIFIERS
FEATURES
* Ideal for surface mount applications
* Easy pick and place
* Built-in strain relief
* High surge current capability
MECHANICAL DATA
* Case: Molded plastic
* Epoxy: UL 94V-0 rate flame retardant
* Terminals: Solder plated, solderable per MIL-STD-202F,
method 208 guranteed
* Polarity: Color band denotes cathode end
* Mounting position: Any
* ^{Weight: 0.063 gram}
* Both normal and Pb free product are available:
* Normal:80~95%Sn,5~20%Pb
* Pb free:99 Sn above can meet Rohs enviroment substance
directive request
VOLTAGE RANGE
50 to 1000 Volts
CURRENT
1.0 Ampere
0.110(2.80)
0.094(2.40)
0.055(1.40)
0.043(1.10)
0.047(1.20)
0.028(0.70)
SMAF
Cathode Band
Top View
0.059(1.50)
0.051(1.30)
0.144(3.65)
0.128(3.25)
0.012(0.30)
0.006(0.15)
0.189(4.80)
0.173(4.40)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating 25 C ambient temperature uniess otherwies specified.
Single phase half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
TYPE NUMBER
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
Peak Forward Surge Current, 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
Maximum Instantaneous Forward Voltage at 1.0A
Maximum DC Reverse Current
Ta=25 C
at Rated DC Blocking Voltage
Ta=100 C
Maximum Reverse Recovery Time (Note 1)
Typical Junction Capacitance (Note 2)
Operating and Storage Temperature Range Tj, TSTG
RS1AF
50
35
50
RS1BF
100
70
100
RS1DF
200
140
200
RS1GF
400
280
400
RS1JF
600
420
600
RS1KF
800
560
800
RS1MF
1000
700
1000
UNITS
V
V
V
1.0
A
30
A
1.3
V
5.0
uA
100
uA
150
250
500
nS
15
pF
-65 +150
C
NOTES:
1. Reverse Recovery Time test condition: IF=0.5A, IR=1.0A, IRR=0.25A
2. Measured at 1MHz and applied reverse voltage of 4.0V D.C.