MUR430-2C4A-2CDO-27 Datasheet, PDF (1/2 Pages) Nanjing International Group Co – 4.0 AMP HIGH EFFICIENCY RECTIFIERS

MUR405 THRU MUR4100
4.0 AMP HIGH EFFICIENCY RECTIFIERS
FEATURES
* Low forward voltage drop
* High current capability
* High reliability
* High surge current capability
* High speed switching
MECHANICAL DATA
* Case: Molded plastic
* Epoxy: UL 94V-0 rate flame retardant
* Lead: Axial leads, solderable per MIL-STD-202,
method 208 guranteed
* Polarity: Color band denotes cathode end
* Mounting position: Any
* ^{Weight: 1.10 grams}
* Both normal and Pb free product are available:
* Normal:80~95%Sn,5~20%Pb
* Pb free:99 Sn above can meet Rohs enviroment substance
directive request
VOLTAGE RANGE
50 to 1000 Volts
CURRENT
4.0 Amperes
DO-27
.220(5.6)
.197(5.0)
DIA.
0.945(24.0)
MIN.
.375(9.5)
.285(7.2)
.052(1.3)
.043(1.1)
DIA.
0.945(24.0)
MIN.
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating 25 C ambient temperature uniess otherwies specified.
Single phase half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
TYPE NUMBER
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
.375"(9.5mm) Lead Length at Ta=50 C
Peak Forward Surge Current, 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
Maximum Instantaneous Forward Voltage at 3.0A
Maximum DC Reverse Current
Ta=25 C
at Rated DC Blocking Voltage
Ta=100 C
Maximum Reverse Recovery Time (Note 1)
Typical Junction Capacitance (Note 2)
Operating and Storage Temperature Range Tj, TSTG
MUR405 MUR410 MUR420 MUR430 MUR440 MUR460 MUR480 MUR4100 UNITS
50 100 200 300 400 600 800 1000 V
35 70 140 210 280 420 560 700 V
50 100 200 300 400 600 800 1000 V
4.0
A
200
A
1.0
1.3
5
1.70
V
uA
200
50
uA
70
nS
75
pF
-65 +150
C
NOTES:
1. Reverse Recovery Time test condition: IF=0.5A, IR=1.0A, IRR=0.25A
2. Measured at 1MHz and applied reverse voltage of 4.0V D.C.