M1F-M7F Datasheet, PDF (1/2 Pages) Nanjing International Group Co – 1.0 AMP SURFACE MOUNT GENERAL RECTIFIERS

M1F THRU M7F
1.0 AMP SURFACE MOUNT GENERAL RECTIFIERS
FEATURES
* Ideal for surface mount applications
* Easy pick and place
* Built-in strain relief
* High surge current capability
MECHANICAL DATA
* Case: Molded plastic
* Epoxy: UL 94V-0 rate flame retardant
* Terminals: Solder plated, solderable per MIL-STD-202F,
method 208 guranteed
* Polarity: Color band denotes cathode end
* Mounting position: Any
* Weight: 0.063 gram
*Both normal and Pb free product are available:
*Normal:80~95% Sn,5~20% Pb
*Pb free:99 Sn above can meet Roh senviroment substance
directive request
VOLTAGE RANGE
50 to 1000 Volts
CURRENT
1.0 Ampere
SMAF
Cathode Band
Top View
0.110(2.80)
0.094(2.40)
0.059(1.50)
0.051(1.30)
0.055(1.40)
0.043(1.10)
0.047(1.20)
0.028(0.70)
0.144(3.65)
0.128(3.25)
0.012(0.30)
0.006(0.15)
0.189(4.80)
0.173(4.40)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating 25 C ambient temperature uniess otherwies specified.
Single phase half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
TYPE NUMBER
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
Peak Forward Surge Current, 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
Maximum Instantaneous Forward Voltage at 1.0A
Maximum DC Reverse Current
Ta=25 C
at Rated DC Blocking Voltage
Ta=100 C
Typical Junction Capacitance (Note 1)
Typical Thermal Resistance RqJA (Note 2)
Operating and Storage Temperature Range Tj, TSTG
NOTES:
1. Measured at 1MHz and applied reverse voltage of 4.0V D.C.
2. Thermal Resistance from Junction to Ambient.
M1F
M2F
M3F
M4F
M5F
M6F
M7F UNITS
50 100 200 400 600 800 1000 V
35
70 140 280 420 560 700 V
50 100 200 400 600 800 1000 V
1.0
A
30
A
1.1
V
5.0
µm_A
50
µ^mA
15
pF
50
C/W
-65 +175
C