GP10A Datasheet, PDF (1/2 Pages) Zowie Technology Corporation – SINTERED GLASS PASSIVATED JUNCTION RECTIFIER

GP10A THRU GP10M
1.0 AMP SILICON RECTIFIERS
FEATURES
* Low forward voltage drop
* High current capability
* High reliability
* High surge current capability
MECHANICAL DATA
* Case: Molded plastic
* Epoxy: UL 94V-0 rate flame retardant
* Lead: Axial leads, solderable per MIL-STD-202,
method 208 guranteed
* Polarity: Color band denotes cathode end
* Mounting position: Any
Weight: 0.34 grams
* Both normal and Pb free product are available:
* Normal:80~95%Sn,5~20%Pb
* Pb free:99 Sn above can meet Rohs enviroment substance
directive request
VOLTAGE RANGE
50 to 1000 Volts
CURRENT
1.0 Ampere
DO-41
.107(2.7)
.080(2.0)
DIA.
1.0(25.4)
MIN.
.205(5.2)
.166(4.2)
.031(.8)
.024(.6)
DIA.
1.0(25.4)
MIN.
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating 25 C ambient temperature uniess otherwies specified.
Single phase half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
TYPE NUMBER
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
GP10A
50
35
50
GP10B GP10D GP10G GP10J
100 200 400 600
70 140 280 420
100 200 400 600
GP10K
800
560
800
GP10M UNITS
1000 V
700 V
1000 V
.375"(9.5mm) Lead Length at Ta=75 C
Peak Forward Surge Current, 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
Maximum Instantaneous Forward Voltage at 1.0A
Maximum DC Reverse Current
Ta=25 C
at Rated DC Blocking Voltage
Typical Junction Capacitance (Note 1)
Ta=100 C
Maximum Reverse Recovery Time (Note 2)
Typical Thermal Resistance RqJA (Note 3)
Operating and Storage Temperature Range Tj, TSTG
1.0
A
40
A
1.0
V
5.0
uA
50
uA
15
pF
2500
nS
50
C/W
-65 +150
C
NOTES:
2. Reverse Recovery Time test condition:IF=1.0A, VR=30V.
3. Thermal Resistance from Junction to Ambient .375" (9.5mm) lead length.
1. Measured at 1MHz and applied reverse voltage of 4.0V D.C.